Research of properties of composite material based on polytetrafluoroethylene filled with carbon fiber with titanium nanocoating

Modelling of the Structure and the Required Level of Performance Properties of a Polytetrafluoroethylenecomposites for Sealing

“…The results of research in the field of PCM based on PTFE convincingly proved the effectiveness of the use of carbon fiber ( Figure 2). Established its optimal content of PTFE composites varies over a wide range (5)(6)(7)(8)(9)(10)(11)(12)(13)(14)(15)(16)(17)(18)(19)(20) wt. % depending on the grade of the filler [3,6,10,11].…”

“…When modelling the stress-strain state of a rubber ring, finite elements were used for which the Mooney-Rivlin model (1) was implemented [13,15]:…”

Properties Prediction of Linear Block-Polyurethanes Based on the Mixtures of Simple Oligoethers

“…Berladir et al [3] and Panda et al [16] studied physical and chemical principles of the technology of formation of polymer composite materials. Anisimov [1], Dyadyura et al [6] and Bakirova & Galeeva [2] reported on the properties of thermoplastic polyurethanes based on the various mixtures of oligoethers. Murcinkova & Krenicky [12] applied altered composite microstructures for damping of production machines and manipulator devices, Todic et al [20] and Krenicky [10] implemented multifactorial monitoring methods for evaluation of complex material characteristics.…”

“…Durdan et al [5] implemented various annealing procedures to alter material properties, Piechocki et al [19] controlled properties of oligoethers by using radiation, Macala et al [11] and Pandova et al [18] reported on ways of reduction of harmful substances. Jurko et al [6,7,8] studied mechanical deformation of materials during processing and operation, Valicek et al [21] developed method of the deformation evaluation. Cacko & Krenicky [4] and Panda et al [13,14,15,17] analyzed thermal and tribotechnical characteristics of mechanically exposed parts in order to determine their operating status and durability.…”

“…Wide application of polymeric materials based on polyurethanes is due to the unique combination of high strength properties and elasticity, oil and gas resistance, strike and vibration resistance [1,2]. The relevance of modern technologies [6,7,8,9] is primarily determined by ecological factors -polyurethanes of block structure (block-polyurethanes) provide a unique set of properties and, at the same time, they are also suitable for recycling, are recycled by waste-free technology on high-speed automated equipment, including 3D prototyping methods [17,18]. In addition, block-polyurethanes based on oligoethers have increased hydrolytic resistance, frost resistance, more resistant to microorganisms, and therefore are of particular interest.…”