Research of the combustion process in the initial mixing section of the injection gas burner

Abstract

The economical combustion of gas fuel implies that it takes place with a minimum coefficient of excess air and minimal losses. Constructive, aerodynamic and physical factors have a determining influence on the completeness of combustion and the conditions of ignition. Using the ANSYS software program, the main characteristics of the combustion process in the cylindrical mixing section of a flat flame injection burner are investigated through computer simulation. A geometric model was created on which it is possible to study both straight and rotating jets. The possibility of numerically investigating the combustion of gaseous fuel (C 3 H 8 ) in a confined air flow produced by injection is considered. A k-ε model of turbulence was used, which is based on the equation for turbulent kinetic energy and its dissipation rate. The purpose of the work is to study and analyze the changes and distribution of temperature and speed as well as the concentration of nitrogen oxides and carbon monoxide along the axis of the combustion chamber. The results are presented for the angles of inclination of the nozzles of 45° and 0°. Based on these, an analysis was made, where it 22 was found that with the increase in the degree of rotation, the absolute values of the temperature increase and the change in the mass concentration of the fuel along the length of the mixing section can be used to regulate the combustion process. The created numerical model can be successfully used to determine the main parameters of the burner under the same initial conditions, changing the angle of inclination of the nozzles. The obtained results can be considered as a basis for further research related to increasing the efficiency of the combustion process and lowering the harmful emissions produced by it.

Comprehensive Review on Thermal Performance Enhancement of Domestic Gas Stoves

“…The thermal performance of gas stoves is mainly influenced by combustion efficiency of the burner and heat transfer performance between the burner and the vessel . The principle of the current thermal performance enhancement technology for domestic gas stoves is based on these two methods, such as improving structural optimization, , applying the swirl flow, enhancing mixing of air–fuel, , reducing heat loss, heat recirculation using porous medium, optimizing fuel composition, etc.…”