Despite the prevalent application of 18% Ni maraging steel in critical sectors such as aerospace and automotive due to its unique characteristics, including high ductility, yield strength, and hardenability, its machining presents enormous challenges, categorizing it as a difficult-to-machine material. The cutting tool’s geometry is crucial in machining, significantly affecting chip formation, cutting forces, power consumption, and obtainable surface quality. In particular, wiper insert technology, characterized by its multi-radius design, offers an increased contact area compared to conventional inserts, potentially enhancing the quality of the machined surface. This study explores the effectiveness of wiper inserts in the face-milling of maraging steel 350, conducting a comparative analysis across three distinct machining setups. These setups vary by alternating the number of wiper and conventional inserts within the same cutter, thereby examining the influence of insert configuration on machining outcomes. The research employs a reliable and well-established statistical approach to evaluate how different variables, such as cutting speed and feed rate, affect surface quality, power consumption, and material removal rate (MRR). It also sheds light on the material removal mechanisms facilitated by each type of insert. The findings reveal that incorporating a higher number of wiper inserts significantly enhances the surface finish but concurrently increases power consumption. Thus, the study successfully identifies an optimal set of process parameters that attain a balance between achieving superior surface quality and maintaining energy efficiency in the machining of maraging steel 350. This balance is crucial for optimizing manufacturing processes while adhering to the stringent quality and sustainability standards required in aerospace and automotive manufacturing.
