Research on Deformation Prediction of VMD-GRU Deep Foundation Pit Based on PSO Optimization Parameters

Abstract

As a key guarantee and cornerstone of building quality, the importance of deformation prediction for deep foundation pits cannot be ignored. However, the deformation data of deep foundation pits have the characteristics of nonlinearity and instability, which will increase the difficulty of deformation prediction. In response to this characteristic and the difficulty of traditional deformation prediction methods to excavate the correlation between data of different time spans, the advantages of variational mode decomposition (VMD) in processing non-stationary series and a gated cycle unit (GRU) in processing complex time series data are considered. A predictive model combining particle swarm optimization (PSO), variational mode decomposition, and a gated cyclic unit is proposed. Firstly, the VMD optimized by the PSO algorithm was used to decompose the original data and obtain the Internet Message Format (IMF). Secondly, the GRU model optimized by PSO was used to predict each IMF. Finally, the predicted value of each component was summed with equal weight to obtain the final predicted value. The case study results show that the average absolute errors of the PSO-GRU prediction model on the original sequence, EMD decomposition, and VMD decomposition data are 0.502 mm, 0.462 mm, and 0.127 mm, respectively. Compared with the prediction mean square errors of the LSTM, GRU, and PSO-LSTM prediction models, the PSO-GRU on the PTB0 data of VMD decomposition decreased by 62.76%, 75.99%, and 53.14%, respectively. The PTB04 data decreased by 70%, 85.17%, and 69.36%, respectively. In addition, compared to the PSO-LSTM model, it decreased by 8.57% in terms of the model time. When the prediction step size increased from three stages to five stages, the mean errors of the four prediction models on the original data, EMD decomposed data, and VMD decomposed data increased by 28.17%, 3.44%, and 14.24%, respectively. The data decomposed by VMD are more conducive to model prediction and can effectively improve the accuracy of model prediction. An increase in the prediction step size will reduce the accuracy of the deformation prediction. The PSO-VMD-GRU model constructed has the advantages of reliable accuracy and a wide application range, and can effectively guide the construction of foundation pit engineering.

Multi-Objective Process Parameter Optimization of Ultrasonic Rolling Combining Machine Learning and Non-Dominated Sorting Genetic Algorithm-II

“…Mambuscay et al [ 28 ] employed a random forest model to directly predict Vickers hardness values from scanned indentation images, eliminating the need for diagonal measurements. Liu et al [ 29 ] constructed a VMD-GRU model to predict the deformation of deep excavations, with experimental results confirming the model’s accuracy and effectiveness. If the processing results can be predicted based on process parameters, the machine learning model will effectively assist in optimizing process parameters.…”