Research on Optimal Operation of Regional Integrated Energy Systems in View of Demand Response and Improved Carbon Trading

To address the increasing hydrogen demand and carbon emissions of industrial parks, this paper proposes an integrated energy system dispatch strategy considering multi-hydrogen supply and comprehensive demand response. This model adopts power-to-gas technology to produce green hydrogen, replacing a portion of gray hydrogen and incorporates a carbon capture system to effectively reduce the overall carbon emissions of the industrial park. Meanwhile, incentive-based and price-based demand response strategies are implemented to optimize the load curve. A scheduling model is established targeting the minimization of procurement, operation, carbon emission, and wind curtailment costs. The case study of a northern industrial park in China demonstrates that the joint supply of green and gray hydrogen reduces carbon emissions by 40.98% and costs by 17.93% compared to solely using gray hydrogen. The proposed approach successfully coordinates the economic and environmental performance of the integrated energy system. This study provides an effective scheduling strategy for industrial parks to accommodate high shares of renewables while meeting hydrogen needs and carbon reduction targets.

Section: Procurement Constraintsmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Low-Carbon Economic Dispatch of Integrated Energy Systems in Industrial Parks Considering Comprehensive Demand Response and Multi-Hydrogen Supply

Su,

Wang,

Wang

et al. 2024

“…The load side consist of electrical, cooling and heating loads. Due to the limited space, and because the mathematical modeling work of various types of equipment contained in the CCHP is very mature, the modeling work of this paper is no longer discussed, and the mathematical model of each equipment can be found in [25,26]. The internal structure diagram of the CCHP contained in Figure 1 is shown in Figure 2.…”

Section: Structure Of Multi-district Riesmentioning

confidence: 99%

Dynamic Robust Optimization Method Based on Two-Stage Evaluation and Its Application in Optimal Scheduling of Integrated Energy System

Zhou,

2024

As an emerging energy allocation method, shared energy storage devices play an important role in modern power systems. At the same time, with the continuous improvement in renewable energy penetration, modern power systems are facing more uncertainties from the source side. Therefore, a robust optimization algorithm that considers both shared energy storage devices and source-side uncertainty is needed. Responding to the above issues, this paper first establishes an optimal model of a regional integrated energy system with shared energy storage. Secondly, the uncertainty problem is transformed into a dynamic optimization problem with time-varying parameters, and a modified robust optimization over time algorithm combined with scenario analysis is proposed to solve such optimization problems. Finally, an optimal scheduling objective function with the lowest operating cost of the system as the optimization objective is established. In the experimental part, this paper first establishes a dynamic benchmark test function to verify the validity of proposed method. Secondly, the multi-mode actual verification of the proposed algorithm is carried out through a regional integrated energy system. The simulation results show that the modified robust optimization over time (ROOT) algorithm could find solutions with better robustness in the same dynamic environment based on the two-stage evaluation strategy. Compared with the existing algorithms, the average fitness and survival time of the robust solution obtained by the modified ROOT algorithm are increased by 94.41% and 179.78%. At the same time, the operating cost of the system is reduced by 11.65% by using the combined optimization scheduling method proposed in this paper.

“…In the optimal scheduling of the IES, α grid , α s , and α i are the decision variables, and they need to be confined to reasonable ranges that are related to the capacities of the devices. Formula ( 14) can be expanded into the energy flow equilibrium equation in [34] or written as the standard equation constraint form Ax =b.…”

Section: Steady-state Modelmentioning

confidence: 99%

Energy Bus-Based Matrix Modeling and Optimal Scheduling for Integrated Energy Systems

Zhang,

2024

Integrated energy systems (IESs) can easily accommodate renewable energy resources (RESs) and improve the utilization efficiency of fossil energy by integrating various energy production, conversion, and storage technologies. However, the coupled multi-energy flows and the uncertainty of RESs bring challenges regarding optimal scheduling. Therefore, this study proposes an energy bus-based matrix-modeling method and a coordinated scheduling strategy for the IES. The matrix-modeling method can be used to formulate the steady- and transient-state balances of the multi-energy flows, and the transient model can clearly express the multi-time-scale characteristics of the different energy flows. The model parameters are fitted with data from experiments and the literature. To address the inherent randomness of the RESs and loads, a coordinated scheduling strategy is designed that contains two components: day-ahead optimization and rolling optimization. Day-ahead optimization uses the system steady-state model and multiple scenarios from the RES and load forecast data to minimize the operation cost while rolling optimization is based on the system’s transient-state model and aims to achieve the optimal real-time scheduling of the energy flows. Finally, a case study is conducted to verify the advantages and effectiveness of the proposed model and optimization method. The results show that stochastic optimization reduces the total daily cost by 1.48% compared to deterministic optimization when considering the prediction errors associated with the RESs and loads, highlighting the stronger adaptability of stochastic optimization to prediction errors. Moreover, rolling optimization based on the system’s transient-state model can reduce the errors between day-ahead scheduling and rolling correction.