“…Besides the major components (CO, H 2 and CO 2 ), biomass-derived syngas may contain additional constituents such as ethylene (C 2 H 4 ), ethane (C 2 H 6 ), acetylene (C 2 H 2 ), tar, ash, char particles, oxygen (O 2 ), ammonia (NH 3 ), nitric oxide (NO), hydrogen sulfide (H 2 S), sulfur dioxide (SO 2 ) and hydrogen cyanide (HCN) [53][54][55]. Tars can be composed of several high-molecular weight molecules that are gas chromatography undetectable, such as 7 carbon and higher ring compounds, heterocycles such as phenol, cresol and pyridine, light aromatic such as toluene, styrene and xylene, light poly-aromatic such as naphthalene, phenanthrene and anthracene, and heavy poly-aromatic such as fluoranthene, pyrene, chrysene, perylene and benzoperylene; however, usually these components are not evaluated individually [48].The composition in terms of these impurities in syngas varies with feedstock type, gasifying agent and operating conditions [56], but the most frequently found compounds are tar, ammonia (NH 3 ), nitric oxide (NO) and hydrogen cyanide (HCN) [53]. Some of these impurities can inhibit acetogenic bacterial activity, even at very low concentrations, by limiting cell growth, enzyme activities or by changing physiochemical conditions (pH, osmolarity, redox potential, etc.)…”