Resolution recovery for Compton camera using origin ensemble algorithm

Abstract

Purpose: Compton cameras (CCs) use electronic collimation to reconstruct the images of activity distribution. Although this approach can greatly improve imaging efficiency, due to complex geometry of the CC principle, image reconstruction with the standard iterative algorithms, such as ordered subset expectation maximization (OSEM), can be very time-consuming, even more so if resolution recovery (RR) is implemented. We have previously shown that the origin ensemble (OE) algorithm can be used for the reconstruction of the CC data. Here we propose a method of extending our OE algorithm to include RR. Methods: To validate the proposed algorithm we used Monte Carlo simulations of a CC composed of multiple layers of pixelated CZT detectors and designed for imaging small animals. A series of CC acquisitions of small hot spheres and the Derenzo phantom placed in air were simulated. Images obtained from (a) the exact data, (b) blurred data but reconstructed without resolution recovery, and (c) blurred and reconstructed with resolution recovery were compared. Furthermore, the reconstructed contrast-to-background ratios were investigated using the phantom with nine spheres placed in a hot background.Results: Our simulations demonstrate that the proposed method allows for the recovery of the resolution loss that is due to imperfect accuracy of event detection. Additionally, tests of camera sensitivity corresponding to different detector configurations demonstrate that the proposed CC design has sensitivity comparable to PET. When the same number of events were considered, the computation time per iteration increased only by a factor of 2 when OE reconstruction with the resolution recovery correction was performed relative to the original OE algorithm. We estimate that the addition of resolution recovery to the OSEM would increase reconstruction times by 2-3 orders of magnitude per iteration. Conclusions: The results of our tests demonstrate the improvement of image resolution provided by the OE reconstructions with resolution recovery. The quality of images and their contrast are similar to those obtained from the OE reconstructions from scans simulated with perfect energy and spatial resolutions. C

Capability of MLEM and OE to Detect Range Shifts With a Compton Camera in Particle Therapy

“…Some preliminary simulations including energy resolution for the scatterers and absorber show a non-negligible degradation of the shift estimates. To a certain extend, some compensation should be achieved by modeling the limited resolution into the reconstruction, either in the system matrix or in the selection of the cone parameters [14]- [17]. For the considered CC configuration with seven scatterers including multiple coincidences into the reconstruction helped to increase the statistical quality of the data and compensate for the effects of miscalculated E 0 introduced by two-interaction coincidences.…”

Time of flight dual photon emission computed tomography

“…Moreover, to further improve the spatial resolution for TOF-DuPECT system, a resolution recovery method can also be considered and implemented via an estimation of the depth of interaction in the detector or by modeling the uncertainty of the timing. In 2016, Andreyev proposed a modified version of the SOE algorithm to model the probability distributions of the measured energy and the interaction locations in the detectors of a Compton camera 52 . This modified SOE algorithm enables images to be reconstructed with a resolution recovery option with little additional computational cost.…”

Progress towards a semiconductor Compton camera for prompt gamma imaging during proton beam therapy for range and dose verification

“…After the iterations, the sources are better resolved and the background around the sources decreases. The image reconstruction using SOE can potentially be further improved by implementing resolution recovery [17].…”