Rheological Properties of Lunar Mortars

Abstract

NASA has revealed that they plan to resume manned missions and ensure the permanent presence of people in the so-called habitats on the Moon by 2024. Moon habitats are expected to be built using local resources—it is planned to use lunar regolith as aggregate in lunar concrete. Lunar concrete design requires a new approach in terms of both the production technology and the operating conditions significantly different from the Earth. Considering that more and more often it is assumed that the water present on the Moon in the form of ice might be used to maintain the base, but also to construct the base structure, the authors decided to investigate slightly more traditional composites than the recently promoted sulfur and polymer composites thermally hardened and cured. Numerous compositions of cement “lunar micro-mortars” and “lunar mortars” were made and tested to study rheological properties, namely, the consistency, which largely depend on the morphology of the fine-grained filler, i.e., regolith. For obvious reasons, the lunar regolith simulant (LRS) was used in place of the original Moon regolith. The used LRS mapped the grain size distribution and morphology of the real lunar regolith. It was created for the purpose of studying the erosive effect of dusty regolith fractions on the moving parts of lunar landers and other mechanical equipment; therefore, it simulated well the behavior of regolith particles in relation to cement paste. The obtained results made it possible to develop preliminary compositions for “lunar mortars” (possible to apply in, e.g., 3D concrete printing) and to prepare, test, and evaluate mortar properties in comparison to traditional quartz mortars (under the conditions of the Earth laboratory).

Prioritization of habitat construction materials on Mars based on multi-criteria decision-making

“…with Si-rich clay or shale and heating it at temperatures of approximately 1450 °C [53,54]. Most research on space construction has been conducted on OPC terrestrial binders because of their high durability, strength, and simplicity [1,[55][56][57][58][59]. One of the disadvantages of the potential use of Portland cement mortar on Mars is the shortage of CaCO3 on Mars, which would not be sufficient for OPC production [8].…”

“…Portland cement mortar requires high energy during processing (1400 °C) and 28 Earth days of maintenance at a temperature higher than the freezing point of water for complete hydration [8,58,166].…”

Electromagnetic Characterization of EAC-1A and JSC-2A Lunar Regolith Simulants

“…One of the reasons why it is important to know the electromagnetic properties of lunar regolith (lunar surface dust) is to be able to use this material as an in situ resource (ISR) [1][2][3]. The latter enables the permanent or temporary human presence on the Moon, which is of great importance for further human space exploration and colonization [4].…”