“…Generally, bifunctional catalysts were employed to promote the glucose hydrogenolysis reaction, − among which Ru-based bifunctional catalysts have attracted particular attention because of their remarkable hydrogenation activities and highly efficient conversion ability to hydrolyze glucose to form polyols. − ,− Furthermore, it was reported that the catalytic process and the yield of polyols were influenced by the supports and their surface properties. , The tungsten-supported catalysts were among the most effective agents in promoting C–C bond cleavage . There were quite a few studies on Ru-based tungsten-supported catalysts, showing that the amount of acid sites plays a crucial role in catalyzing C–O and C–C bond breaking to tune the product distribution. ,,, Although various forms of tungsten, such as WO 3 , and WO x ( x =1–3) , with or without being further supported on SiO 2 and/or carbon and/or other oxides and/or noble metals as cocatalyst are reported. ,,,,,− Also Ru-based nanocatalysts on other supports (e.g., carbon/activated carbon, metal oxide, metal/carbon composite) are reported for hydrogenolysis of glucose to glycols, ,,− and there is only one report citing 5% Ru on 30% W 18 O 49 on graphene support for conversion of cellulose to glycols with total glycol selectivity as 77.8% . Notably, the fabrication of Ru/W 18 O 49 or Ru/WO x -based catalysts is rare ,,, and has not been reported so far for the conversion of glucose to glycols, to the best of our knowledge.…”