Sampling Procedure, Characterization, and Quantitative Analyses of Industrial Aluminum White Dross

Abstract

Up to 10% of all metallic aluminum (Al) produced is lost due to dross generation during production. It also causes an environmental problem due to hazardous waste generation following treatment, as well as toxic gas generation when in contact with water/humidity. As a result, it is desirable to identify the parameters contributing to the generation of the Al white dross mixture. In view of this, a sampling procedure for collecting representative dross samples directly from the casthouse holding furnace has been developed together with a methodology for analyzing and evaluating the results. XRD was used for phase/chemical composition analyses of sieved dross samples, and both ring milling and cryomilling were used during sample preparation. Cryomilling proved to be the superior method allowing dross fractions < 1.25 and 1.25–4.5 mm to be pulverized. The fractions were analyzed and revealed that the sampling location inside the furnace plays a vital role as the injection of primary-produced Al into the furnace influences the dross characteristics. From Location 1 (closest to the injection point) to Location 4 (furthest away from the injection point), the metallic Al content in the dross decreased simultaneously as the oxide content increased. The results also confirmed that the larger size fraction had a higher metallic Al concentration, which correlates well with literature findings. By adopting a methodical sampling procedure followed by consistent routines for sample preparation, characterization, and analyses, process operations can be studied and thereby potentially used to minimize the loss of Al due to dross formation. Graphical Abstract

Exploring Strategies Related to Usability of Assistive Technologies in Implementing Inclusive Education among Visually Impaired Lecturers in Tanzania

“…Consequently, a target population includes all people to participate in a study, whereas the sample is a part of the population (Tamminen & Poucher, 2020). The sampling procedure is a practical way that allows data to be collected quickly and at a lower cost than attempting to reach every member of the population (Solem, 2023). The sampling of this study was drawn from the study area by using the snowball technique.…”

Experimental Study of a Representative Sample to Determine the Chemical Composition of Cast Iron

“…Their distribution to various preparation centers and induction to the laboratory are handled automatically. Sampling molten metal by immersing the ingot mold into the melt for determination of hydrogen excludes the subjective factors affecting the sampling and enables the taking of samples from metallurgical containers at different depths [ 18 , 19 , 20 ].…”