3D printed‐polylactic acid scaffolds coated with natural rubber latex for biomedical application

Abstract

Three‐dimensional (3D) printing is a rapidly growing technology and plays an emerging role in several biomedical applications. Polylactic acid (PLA) is one of the most common materials in 3D printing, however, it is chemically inert due to the absence of reactive side chain groups. In this context, in this work, the PLA scaffolds with two different geometries were produced and coated with natural rubber latex (NRL) extracted from the rubber tree Hevea brasiliensis. NRL presents bioactive substances that are related to its biological properties. The results revealed scaffolds with interconnected pores and pores sizes from 600 to 1300 μm. The NRL coatings caused a decrease in pore size. Infrared spectra showed that 2 NRL layers were more efficient in coverage. Compressive strength values obtained are in agreement with the spongy bones value (22–24 MPa for crossbar and 20–22 MPa for roundbar cube). Finally, the hemolytic activity of the PLA scaffold was 3%, while the scaffolds coated with 1 and 2 NRL layers presented values of 0%, indicating a potential use in biomedical applications due to the absence of hemolytic effects.

Comparison of NIH 3T3 Cellular Adhesion on Fibrous Scaffolds Constructed from Natural and Synthetic Polymers

“…We selected PLA to represent synthetic polymers in this study because, much like how collagen exhibits many key advantages and disadvantages of natural polymers, so does PLA for synthetic ones. These advantages include the aforementioned high biocompatibility, as well as the high biodegradability, excellent mechanical and barrier properties, relatively low cost, and high tunability, which can be controlled during production or post-processing [ 16 ]. This allows for the more precise and controllable mimicry of the extracellular matrix.…”

3D-Printed PLA Medical Devices: Physicochemical Changes and Biological Response after Sterilisation Treatments

“…This polymer stands out for its behaviour in contact with biological media, as it gradually degrades into innocuous lactic acid or carbon dioxide and water and is metabolised intracellularly or excreted in urine and breath over time [ 1 , 3 ]. In addition to this immunologically inert response, PLA does not produce toxic or carcinogenic effects in local tissues, it is completely reabsorbed, and its production is relatively cost-efficient as compared to other traditional biodegradable polymers [ 4 ]. Given its biocompatible, biodegradable and bioabsorbable properties, PLA has become one of the most commonly used polymers in clinics with numerous applications including medical implants, porous scaffolds, sutures, cell carriers, drug delivery systems and a myriad of other fabrications [ 1 , 2 , 5 ].…”

Synthesis of Fluorine‐Containing, UV‐Responsive PLA‐Based Materials by Means of Functionalized DOX Monomer

“…[ 6,7 ] In particular, employment in the biomedical field has always attracted much interest, thanks to PLA biocompatibility and good processability, which allows for the preparation of scaffolds, even with complex shapes. [ 8,9 ] However, PLA's poor toughness has always been a strong hurdle to its applicability in this field, especially when dealing with bone‐regeneration applications. [ 10,11 ] In the search for possible improvements of PLA's mechanical properties, one of the most investigated approaches relies on the preparation of crosslinked materials, since crosslinks impart additional dimensional stability to the polymer, improving its toughness.…”