Segmented object manufacturing

Abstract

Rapid Prototyping (RP) is a technology based on a "divide-and-conquer" strategy that enables automatic physical realization of a design without any special tooling. However, existing RP processes suffer from staircase defects since they are all based on 2.5-axis kinematics. To minimize the error due to staircase defects parts are normally built from very thin layers typically with thickness values of 0.010 to 0.300 mm. Therefore, hundreds of layers are required to produce a typical object making RP a slow and costly process. To overcome these limitations, a new RP process called Segmented Object Manufacturing (SOM) is proposed in this paper. SOM makes use of three-axis kinematics in conjunction with a novel slicing method. Slicing in SOM is based on certain visibility-based considerations and is independent of the part accuracy. Since only a few thick layers are used in the SOM technique, a part can be produced faster and cheaper with an accuracy comparable to that of CNC machining.

3D Terrestrial Laser Technology in Sporting Craft 3D Modelling

“…Due cost effectiveness and high quality results, CAD/CAM and CNC machining is one of the largest areas of expansion and renovation in the automation and coordination of design and manufacturing processes in a wide range of manufacturing processes [2]. In order to program the machine's operations, this manufacturing process requires 3D digital models of the objects that are to be manufactured.…”