Significance of Chemical Reaction and Lorentz Force on Third-Grade Fluid Flow and Heat Transfer with Darcy–Forchheimer Law over an Inclined Exponentially Stretching Sheet Embedded in a Porous Medium

Abstract

The combined impact of a linear chemical reaction and Lorentz force on heat and mass transfer in a third-grade fluid with the Darcy–Forchheimer relation over an inclined, exponentially stretching surface embedded in a porous medium is investigated. The proposed process is mathematically expressed in terms of nonlinear and coupled partial differential equations, with the symmetry of the conditions normal to the surface. To solve the mathematical model of the proposed phenomenon, the partial differential equations are first reduced to ordinary differential equations; then, MATLAB built-in Numerical Solver bvp4c is used to obtain the numerical results of these equations. The influence of all the pertinent parameters that appeared in the flow model on the unknown material properties of interest is depicted in the forms of tables and graphs. The physical attitude of the unknown variables is discussed with physical reasoning. From the numerical solutions, it is inferred that, as Lorentz force parameter is increased, the velocity of the fluid decreases, but fluid temperature and mass concentration increase. Thisis due to the fact that Lorentz force retards the motion of fluid, and the increasing resistive force causes the rise in the temperature of the fluid. It is also noted that, owing to an increasein the magnitude of chemical reaction parameter , the velocity profile and the mass concentration decline as well, but the fluid temperature increases in a reasonable manner. It is noted that, by augmenting the values of the local inertial coefficient and the permeability parameter , the velocity field decreases, the temperature field increases, and mass concentration also increases with reasonable difference. Increasing values of Prandtl number results in a decrease in the profiles of velocity and temperature. All the numerical results are computed at the angle of inclination . The current results are compared with the available results in the existing literature for thisspecial case, and there is good agreement between them that shows the validation of the present study. All the numerical results show asymptotic behavior by satisfying the given boundary conditions.

MHD Williamson Nanofluid Fluid Flow and Heat Transfer Past a Non-Linear Stretching Sheet Implanted in a Porous Medium: Effects of Heat Generation and Viscous Dissipation

“…The investigations concentrating on fluid flows and heat transportation in porous medium are given in Refs. [27][28][29][30].…”

Pattern Formation Induced by Fuzzy Fractional-Order Model of COVID-19

“…The parameters are included in Table 1 for convenience. In recent years, fuzzy calculus and FODEs [14][15][16][17] have been added to current calculus and DEs, respectively. Then, FODEs were expanded to fuzzy FODEs [18][19][20].…”

Existence Results of Fuzzy Delay Impulsive Fractional Differential Equation by Fixed Point Theory Approach

“…Liu [20] investigated an approximate method for solving unknown differential equations. Abbas et al [21,22] worked on a partial differential equation. Niazi et al [23,24], Iqbal et al [25], Shafqat et al [26], Abuasbeh et al [27], and Alnahdi [28] existence-uniqueness of the FFEE were investigated.…”