Simple and Sensitive Synchronous- Fluorescence Method for the Determination of Trace Bisphenol S Based on its Inhibitory Effect on the Fluorescence Quenching Reaction of Rhodamine B

Abstract

An inhibitory kinetic fluorimetric method is reported for the determination of trace bisphenol S (BPS). The proposed method is based on the inhibitory effect of BPS on the fluorescence quenching of rhodamine B (RhB) caused by potassium bromate in a dilute phosphoric acid medium. Under the optimal conditions of the experiment, the detection limit for BPS was 0.021 mg/L, and the linear range of determination was from 0.035 mg/L to 0.750 mg/L. The relative standard deviations of 11 measurements for 0.20 mg/L and 0.40 mg/L BPS solutions were 2.74 % and 1.87 %, respectively. The method was successfully applied to the determination of bisphenol S derived from commercially available plastic film samples in hot water. A possible reaction mechanism of the inhibitory effect of BPS on the fluorescence quenching of RhB was proposed.

Light emitting diodes based on carbon dots derived from food, beverage, and combustion wastes

“…AFM height information, 3d rendering, and TEM images ( Fig. 25,26 Further analyses of emission spectra suggested that full width at half maximum (FWHM) of emission peak for CDWF was not significantly different than that peak obtained from CDSD. Fig.…”

Novel Potentiometric Screen-printed Carbon Electrodes for Bisphenol S Detection in Commercial Plastic Samples

“…Based on the increased production and use of BPS, it was used as a model organic pollutant, and many analytical procedures were introduced for its sensitive assay. These approaches include UV-spectrophotometry, 11 high-pressure liquid chromatography (HPLC) 12 and ultra performance/pressure liquid chromatography with mass spectrometric detection (UPLC-MS/MS). 13 Aside from their sensitivity, all of the preceding approaches have the disadvantages of expensive instrumentation, long experimental times, and the need for expertise personnel.…”

Simultaneous determination of 17 bisphenols in polycarbonate by ultra‐high performance supercritical fluid chromatography with tandem mass spectrometry

“…Chromatographic technique has played an important role in the analysis of bisphenols in various samples , including LC–UV , LC coupled to fluorescence detector , GC–MS , and LC–MS/MS . Although these methods have acceptable results, their disadvantages commonly exist.…”