Simulation Analysis of an Atmospheric Turbulence Wavefront Measurement System

Abstract

In this paper, a turbulent wavefront measurement model based on the Hartmann system structure is proposed. The maximum recognizable mode number of different lens units is discussed, and the influence of different lens array arrangements on the accuracy of turbulent wavefront reconstruction is analyzed. The results indicate that the increase in the aberration order of the turbulent wavefront has a certain influence on the reconstruction ability of the system. Different lens arrangements and number of lens units will lead to the effective reconstruction of different final mode orders. When using a 5 × 5 lens array arrangement and a hexagonal arrangement of 19 lenses, the maximum order of turbulent wavefront aberrations allowing for effective reconstruction was 25. When the sparse arrangement of 25 lenses or the sparse arrangement of 31 lenses was used, the maximum order allowing for effective reconstruction was 36. If the aberration composition of the turbulent wavefront contained higher-order aberrations, the system could not accurately measure the turbulent wavefront. When the order of the aberrations of the turbulent wavefront was low, the turbulent wavefront could be measured by the lens arrangement with fewer lens units, and the wavefront reconstruction accuracy was close to the measurement results obtained when more lens units were used.