Simulation of Ash Deposition Behavior in an Entrained Flow Coal Gasifier

Abstract

Fly ash deposition is an important phenomenon associated with ash/slag handling and discharge in the entrained-flow coal gasification process. Fouling and slagging inside the gasifier may cause reliability and safety problems because they can impose strong negative effects on the gasifier wall in the way of heat transfer and chemical corrosion. For these reasons, this study focuses on investigating the ash deposition distribution inside of a two-stage entrained-flow gasifier. The computational model is developed in order to simulate the gasification process with a focus on modeling ash formation, fly ash, and ash deposition. The Eulerian-Lagrangian approach is applied to solve the reactive thermal-flow field and particle trajectories with heterogeneous reactions. The governing equations include the Navier-Stokes equations, twelve species transport equations, and ten global chemical reactions consisting of three heterogeneous reactions and seven homogeneous reactions. The coal/ash particles are tracked with the Lagrangian method. The effects of different coal/ash injection schemes and different coal types on ash deposition have been investigated. The results show that the two-stage fuel feeding scheme could distribute the ash throughout a larger gasifier's volume and, hence, could reduce the peak ash deposition rate and make the ash distribution more uniform inside the gasifier. Gasification of a high-ash coal results in a high ash deposition rate, low syngas higher heating value (HHV), and low carbon conversion rate. The result of ash deposition rate in this study can be used as a boundary condition to provide ash particle influx distribution for use in slagging models.

Numerical Insights Into Gas Mixing System Design for Energy Conversion Processes

“…turbulence model was used for the steady-state calculations and Large Eddy Simulation (LES) [10] with the WALE sub-grid model [11] for transient simulations.…”

Methanol Production Units of Modular Type for Industry Decarbonization

“…They are set to account for more than a third of the growth in oil demand by 2030, and nearly half by 2050. Petrochemicals are also poised to consume an additional 56 billion cubic meters of natural gas by 2030 [16]. Therefore, the relevance of modular plants for the production of chemicals in the fields will remain in the future.…”

Ash deposit characteristics of blended coal in coal combustion process

“…The feedstock is partially reacted with oxygen at high temperature and pressurized condition, using less than 30% of the oxygen required for complete combustion. The syngas produced can be used as a fuel, usually in boilers or gas turbines to generate electricity (Lu and Wang, 2015).…”