Simulation of Flood Detection System Using Atmega 8535 Microcontroller

Abstract

Flood disasters are usually caused by the rising of sea water and high rainfall resulting in high water discharge. One way to reduce the impact of losses caused by standing water is to measure the height of the water discharge. An ultrasonic sensor that is based on a microcontroller can be used to measure the height of the water discharge. This water level monitoring system is carried out by implementing a microcontroller-based ultrasonic sensor. The use of this system is expected by the writer to be a water level detection simulation where the system works by giving an alarm when the height of the water discharge crosses the limit set on the system. When the height of the water discharge exceeds the limit, the system will provide information in the form of an alarm sound and the system display that is initially green turns red.

Automation system spraying desinfectant at Universitas Musamus

“…From the above problems, it is necessary to design a tool that can spray disinfectant automatically so that [3]. This research discusses a system that functions to water plants automatically based on the time set in the program and the system will provide information to the user when the water in the container will run out.…”