Simulation of Starting an Internal Combustion Engine of a Car With a Continuously Variable Transmission

Abstract

The aim of the work is to build a computer dynamic model of moving internal combustion engine parts and a continu-ously variable transmission to determine the starting characteristics of the internal combustion engine. The paper objective is to define the characteristics of moving parts of the internal combustion engine and continuously variable transmission when starting the internal combustion engine with an electric starter. The research method is computer modelling of moving internal combustion engine and transmission parts when starting with an electric starter. The novelty of the work lies in building a computer model of moving parts of an internal combustion engine and a contin-uously variable transmission, connected by a torsional vibration damper, considering changes in friction parameters. The results are in developing a computer model to determine the starting characteristics of a four-cylinder in-line four-stroke internal combustion engine with spark ignition and a continuously variable multitronic® 01J transmis-sion. To check the computer model adequacy, the author uses the values of the average friction pressure in accord-ance with GOST R 54120-2010 and empirical data on the unevenness of the angular velocity of the crankshaft. Simu-lating a four-stage start of an internal combustion engine shows that opening the cylinder valves at the 1st stage in-creases the angular velocity of the crankshaft by 4%. Temporary switching on the reverse clutch for 1.4 s reduces the amplitude of angular oscillations of the solar shaft by 2.22 times, eliminates the beating of the contacting gearbox teeth, but slows down the crankshaft speed by 7.6%. After the reverse clutch is turned off, periodic changes in the an-gular velocity of gearbox parts occur.