Single-Crystalline Metal Oxide Nanostructures Synthesized by Plasma-Enhanced Thermal Oxidation

Abstract

To unravel the influence of the temperature and plasma species on the growth of single-crystalline metal oxide nanostructures, zinc, iron, and copper foils were used as substrates for the study of nanostructure synthesis in the glow discharge of the mixture of oxygen and argon gases by a custom-made plasma-enhanced horizontal tube furnace deposition system. The morphology and microstructure of the resulting metal oxide nanomaterials were controlled by changing the reaction temperature from 300 to 600 °C. Experimentally, we confirmed that single-crystalline zinc oxide, copper oxide, and iron oxide nanostructures with tunable morphologies (including nanowires, nanobelts, etc.) can be successfully synthesized via such procedure. A plausible growth mechanism for the synthesis of metal oxide nanostructures under the plasma-based process is proposed and supported by the nanostructure growth modelling. The results of this work are generic, confirmed on three different types of materials, and can be applied for the synthesis of a broader range of metal oxide nanostructures.

Broadband Microwave Signal Dissipation in Nanostructured Copper Oxide at Air‐film Interface**

“…The local stress and diffusion can be further increased by using plasma‐assisted oxidation of copper [13]. The conductive polycrystalline copper oxide nanostructure mixtures are paramagnetic [14], and are known to absorb microwaves, mostly through dielectric loss [15]. The copper oxide layer is also redox‐active.…”

“…Such media supported metal oxides are advantageous in affording larger surface to volume ratios, thus presenting larger reactive surfaces for gas interaction [15,30]. A nanostructured CuO supported on semiconducting polymer membrane, such as cellulose, for gas sensing, has been demonstrated.…”

Zero→Two-Dimensional Metal Nanostructures: An Overview on Methods of Preparation, Characterization, Properties, and Applications

“…The vacuumsealed glass cylinder reactor has two electrodes with pointed ends from each side, and these two electrodes are used to ignite plasma. Adapted from [124], under the terms of the Creative Commons CC BY license. Figure 10.…”

Plasma meets metamaterials: Three ways to advance space micropropulsion systems

“…This may mean integrating different metal and gas plasma sources within a single plasma reactor to enable deposition of complex architectures comprising metallic and carbon elements, or incorporating different reactors separated by vacuum locks within a single system to prevent thus-formed metamaterials, plasma sources, and measuring systems from being polluted and at the same times enabling seamless transfer of samples between different plasma environments. To cover the necessary range of plasma densities, the suggested set of technological plasma sources may include helicon, CCP [86], or ECR [87] plasma sources employed for the preliminary cleaning, heating, and functionalization of the surface; HIPIMS [88] and vacuum arc guns [89], or CCP and ICP [90] sources to conduct the deposition of precursors from the metal or gas phases, respectively. Hollow cathodes [91] enhanced by the auxiliary magnetic field generated by the external system of the magnetic coils [92] (neutral-loop discharge [93], e.g.)…”