This investigation examined the effect of incorporating cerium oxide (CeO2) nanoparticle into diesel and waste plastic oil (WPO) blends on the combustion, performance and emission characteristics of the diesel engine. The WPO was extracted from low density polyethylene using plastic pyrolysis. The blending of diesel and WPO with combination of D70:WPO30 and D50:WPO50 was prepared to evaluate the engine operation. Additionally, the spherical sized CeO2 with 50 mg/L and 100 mg/L was added with this blend. The various blends named as Diesel, D-WPO30, D-WPO30+Ce50, D-WPO30+Ce100, D-WPO50, D-WPO50+Ce50 and D-WPO50+Ce100 were used in this investigation to operate the engine under various load conditions. The experiment was performed using water cooled common rail direct injection (CRDI) diesel engine with prepared D-WPO blend. Different characteristics such as In-cylinder pressure (CP), heat release rate (HRR), ignition delay time (IDT), brake thermal efficiency (BTE), brake specific fuel consumption (BSFC) and exhaust gas temperature (EGT), carbon monoxide (CO), hydrocarbon (HC), nitrogen oxide (NOx) and smoke opacity emission are studied with respect to the effect of different blends and applied load used. It was observed that increasing of CeO2 nanoparticles in blend improved the overall performance and emission of the engine. Form the results, D-WPO30+Ce100 blend showed enhanced brake thermal efficiency (BTE), brake specific fuel consumption (BSFC) and exhaust has temperature (EGT) are 28.2%, 3% and 465oC respectively. Similarly, reduced emission of CO, NOx, HC and smoke opacity was observed in the CeO2 added blends particularly at 100 mg/L. It was concluded that among all blends prepared, the D70:WPO30 with 100 mg/L of CeO2 showed improved combustion, performance and emission characteristics in proposed diesel engine.
