Slip-Resistant Connections with Hot-Dip Galvanized Faying Surface Under Freeze-Thaw Cycles and/or Low Temperature

Abstract

In some occasions, outdoor steel structures like wind towers, bridges, winter sports facilities, and so on are subjected to extreme environmental conditions with the presence of ice and/or with below-zero temperatures. Sometimes in these situations, surface protection of the steel structure is usually designed using hot-dip galvanizing to improve its durability. In these special circumstances, the structure’s connections are also exposed to adverse climatic agents. International standards and codes such as Eurocode 3 or EN1090-2 do not provide indications for these cases. In this experimental research, 24 specimens of non-slip joints with hot-dip galvanized faying surfaces and HV M16 and M20 bolts have been studied. Twelve specimens were subjected to fourteen twelve-hour freeze-thaw cycles, with temperature oscillation and periodic immersion in water. Next, six of the connections were subjected to a slip test under monotonic load at a temperature of −20 ± 0.5 °C and the other six at room temperature. The results were compared with joints kept at room temperature and not subjected to freeze-thaw cycles for the same period of time. The main conclusion of this piece of research is that the short-term slip resistance behavior of joints with hot-dip galvanized surfaces is not reduced for the cases studied.