Small Size Ka-Band Distributed Mems Phase Shifters Using Inductors

Abstract

Abstract-MEMS phase shifter has been developed using inductors. The design consists of a CPW line capacitively and inductively loaded by the periodic set of inductors and electrostatic force actuated MEMS switches as capacitors. By applying a single bias voltage on the line, the characteristic impedance can be changed, which in turn changes the phase velocity of the line and creates a true time delay phase shift. The governing equations for the impedance and loss are derived. The ABCD matrix is defined for a unit cell and multi-cell DMTL phase shifter to extract scattering parameters equations. The MEMS switch is actuated by a 39 voltage waveform using a high resistance bias line. Estimated spring constant and switching time is 22 N/m and 3 µs, respectively. The structure is designed for Ka-band frequency range. The acceptable frequency range for the design containing 21 cells is between 26 GHz and 27 GHz and optimum condition occurs at 26.3 GHz. For the whole structure and optimum condition the un actuated position results in a return loss −16 dB and insertion loss of −1.65 dB. The actuated position results in a return loss −12.5 dB and insertion loss of −1.6 dB. The phase shift for the whole structure is 190 degree. The optimum condition can be easily changed by modifying the design parameters. The spacing in the proposed structures is S = 250 µm. The structure is also low loss. The length and the loss per bit with the phase shift of 270 • are decreased by 37.5 percent and 21 percent respectively.

A Magnetic Field Tunable Yttrium Iron Garnet Millimeter-Wave Dielectric Phase Shifter: Theory and Experiment

“…It is comparable with FOM for semiconductor-device based phase shifters [22][23][24], however is inferior to MEMS phase shifters [25]. Therefore, the only way to increase FOM is by decreasing losses by polishing the sample.…”

INFLUENCE OF TIME AND TEMPERATURE ON RESISTIVITY AND MICROSTRUCTURE OF Cu_x Co_1-x Fe₂ O₄ MIXED FERRITES

“…The conductivity greatly influences the dielectric [3][4][5][6][7] and magnetic behavior of ferrites [8,9]. This created considerable interest in many research workers for the development and potential applications of ferrites in the electronic industry [10][11][12]. Now a days the study of ferrites has occupied an important place in the electronics technology [13].…”

Improved Miniaturized Wide-Band 90-Degree Schiffman Phase Shifter

“…Broad-band phase and amplitude balance can be achieved by using various configurations of phase shifters [1][2][3][4][5][6][7][8][9][10]. The most interesting configuration is the Schiffman differential phase shifter [1], which consists of two transmission lines, one of them folded to be dispersive.…”