Soil Water Characteristic Curve of an Unsaturated Soil under Low Matric Suction Ranges and Different Stress Conditions

Abstract

Accurate evaluation of unsaturated soil properties is critical for the design of geotechnical and geo-environmental structures such as road pavements, foundations, and earth dams. Water retention activity in soils which is used to predict the stability or seepage problems in the ground is one of the key features in unsaturated soil mechanics. Thus, many experimental works have reported on the unsaturated soil properties, and the soil-water characteristic curve (SWCC) test has contributed significantly to the interpretation of matric suction. Since traditional instruments cannot apply stress in SWCC tests, some researchers have developed suction controlled triaxial apparatus, by which SWCC tests are performed under different stress states. Determination of SWCCs under stress conditions similar to those in the field is key for interpretation of the hydro-mechanical behavior of unsaturated soils. This study conducted SWCC tests of unsaturated silt soil in low matric suction ranges under both drying and wetting conditions. The SWCCs were measured under one-dimensional and isotropic confining stresses ranging from 50 to 450 kPa. The micro porous membrane method was used instead of high air entry ceramic disk for controlling relatively low matric suction. The range of matric suction controlled was from 0 to 20 kPa. The study revealed that the measured SWCC in low matric suction ranges seems to be affected by the influence of stress conditions. Isotropic confining stress caused the void structure of the specimen to become dense and consequently, soil moisture flow movement also decreased. The water retention activity was obviously high, and the point regard to air entry value was larger. The study further suggests that the current methods adopted for estimating unsaturated soil properties require further development to take into account the effect of different stress conditions. How to cite this paper: Habasimbi, P. and Nishimura, T.

Experimental Study on State Boundary Surface of Compacted Silty Soil

“…For effective control and measurement of pore water and pore air, a thin membrane "Supor 450" and a Polytetrafluoroethylene (PTFE) sheet were utilized. The thin membrane having a pore size of 0.45 μm, thickness of 140 μm, and air entry value of 250 kPa, was mounted on the bottom pedestal to allow water to flow while blocking the air passage [25]. The PTFE sheet was pasted to the bottom of the top cap to oppose the flow of water.…”

Constant Volume Shear Tests on Compacted Silty Soil

“…A thin membrane, "Supor 450", and a Polytetrafluoroethylene (PTFE) sheet were used to effectively control and measure the pore water and air. The thin membrane was put on the bottom pedestal to allow water to flow while blocking the air passage [28]. It had a pore size of 0.45 μm, a thickness of 140 μm, and an air entry value of 250 kPa.…”

Analytical and Finite-Element-Method-Based Analyses of Pile Shaft Capacity Subjected to Rainfall Infiltration

“…The two-phase zone is the name of the second stratum and the dry zone is the third stratum [1]. One of the properties of unsaturated soil and the most significant indicator that conveys information on the interaction of the water and the solid phases of soils is the SWCC, also known as the soil-water characteristics curve [2]. The SWCC is frequently utilized for both practical activities like optimizing sustainable agricultural production management and also for conducting research on the physical characteristics of soil [1].…”