Cr(VI) can be released into soil as a result of mining, electroplating, and smelting operations. Due to the high toxicity of Cr(VI), its removal is necessary in order to protect ecosystems. Vermiculite is applied in situations where there is a high degree of metal pollution, as it is helpful during the remediation process due to its high cation exchange capacity. The Cr(VI) contained in the vermiculite should be extracted in order to recover it and to reduce the impact on the environment. In this work, adsorption equilibrium data for Cr(VI) in a simulated sorbent for soil remediation (a mixture that included both humic acid (HA) and vermiculite) were a good fit with the Langmuir isotherm model. The simulated sorbent for soil remediation was a favorable sorbent for Cr(VI) when it was in the test soil. An ionic liquid, [C4mim]Cl (1-butyl-3-methylimidazolium chloride), was studied to determine its efficiency in extracting Cr(VI) from the Cr- contaminated simulated sorbent in soil remediation. At 298 K and within 30 min, approximately 33.48 ± 0.79% of Cr(VI) in the simulated sorbent in soil remediation was extracted into [C4mim]Cl. Using FTIR spectroscopy, the absorbance intensities of the bands at 1032 and 1010 cm−1, which were attributed to C-O bond stretching in the polysaccharides of HA, were used to detect the changes in HA in the Cr-contaminated simulated sorbent for soil remediation before and after extraction. The results showed that Cr(VI) that has been absorbed on HA can be extracted into [C4mim]Cl. Using 1H NMR, it was observed that the 1-methylimizadole of [C4mim] Cl played an important role in the extraction of Cr(VI), which bonded with HA on vermiculite and was able to be transformed into the [C4mim]Cl phase.
