High-contrast imaging provided by a coronagraph is critical for the direction imaging of the Earth-like planet orbiting its bright parent star. A major limitation for such direct imaging is the speckle noise that is induced from the wave-front error of an optical system. We derive an algorithm for the wave-front measurement directly from 3 focal plane images. The 3 images are achieved through a deformable mirror to provide specific phases for the optics system. We introduce an extra amplitude modulation on one deformable mirror configuration to create an uncorrelated wave-front, which is a critical procedure for wave-front sensing. The simulation shows that the reconstructed wave-front is consistent with the original wave-front theoretically, which indicates that such an algorithm is a promising technique for the wave-front measurement for the high-contrast imaging.high-contrast imaging, multi-image algorithm, speckle nulling technique, wave-front sensing Discovering life on another planet will be one of the most important scientific advances of this century. The search for life requires the ability to detect photons directly from planets and the use of spectroscopy to analyze physical and atmospheric conditions. The direct detection of earth-like low-mass planets is extremely challenging since the brightness ratio between an Earthlike planet and its parent star is in the order of 10 −9 in the visible, and the diffraction of starlight is much stronger than the nearby planet image. A high-contrast imaging coronagraph can be used to suppress the diffraction light from the bright star, so that the nearby planet can be detected in the ideal case [1][2][3] . However, the actual performance of a high-contrast coronagraph is limited by the wave-front error of the coronagraphic system, which induces speckle noise [4] . Because of the large bright difference, the local speckles are much brighter than the planet image, thus making the direct imaging impossible. To eliminate the wave-front error induced speckle noise, the speckle nulling technique [5] is introduced by the using of a deformable mirror (DM) to create a local dark zone that can be served as a discovery area for the planet imaging. It is expected to gain an extra contrast improvement of 10 −2 -10 −3 after eliminating the speckle noise surrounding the star image.The most important procedure for the dark zone correction is the measurement of the wave-front error. One approach is to reconstruct the wave-front directly from a number of images measured on the focal plane. Recently, Borde & Traub [6] and Give'on et al. [7] provided different algorithms that can reconstruct the wave-front error from 3 focal plane images. Although the focal plane wave-front sensing is a promising technique, it is found that some of their assumptions for the phase reconstruc-