State of the Art of Lithium-Ion Pouch Cells in Automotive Applications: Cell Teardown and Characterization

Abstract

A large-format pouch cell with a nominal capacity of 78Ah from the Volkswagen ID.3 was disassembled and analyzed to characterize the state of the art of industrial-scale cells in automotive applications. The cell components were separated from each other, geometrically measured, and weighed to quantify the volume and weight fractions from electrode to cell level. Material samples from the electrodes were characterized by scanning electron microscopy, elemental analysis, and mercury porosimetry. Half cells were built post mortem and assessed in electrochemical tests. The results revealed a stacked cell of laminated electrode layers. The cathode showed a bi-modal particle distribution of LiNi0.65Mn0.2Co0.15O2. Silicon-free graphite was used as the anode active material. Over 75% of the cell mass and over 81% of the cell volume directly contribute with its active material to the specific energy of 268Wh/kg and energy density of 674Wh/l at cell level. 91% of the anode and 93% of the cathode were utilized in the pristine cell, respectively. In charge rate tests, the anode was identified as the limiting electrode. The results provide valuable insights into the state of the art of automotive lithium-ion batteries and serve as a reference for scientific research.

Impact of Electrode Architecture on Electrochemical Performance of Aqueous Processed, High‐Loaded Lithium‐Ion Battery Cathodes

“…State-of-the-art cathodes do have porosities between 20-30 %. [50,51] Possibilities would be a more extensive calendaring of the cathodes, a further increase of mass loading or the usage of thinner PC structure with similar mass loadings.…”

A general introduction to lithium-ion batteries: From the first concept to the top six commercials and beyond

“…Temperature and humidity are also big factors that have an effect strongly on pouch cells. Despite some disadvantages, lithium pouch cell batteries are one of the most popular formats and are available in a variety of sizes and thicknesses depending on the applications (Table 7) [62,65].…”

Seam Properties of Overlap Welding Strategies from Copper to Aluminum Using Green Laser Radiation for Battery Tab Connections in Electric Vehicles

“…These developments require energy storage systems on an unknown scale, which are therefore the key factor for this progression [ 4 ]. Due to their high energy density, lithium-ion batteries are currently used as accumulators in electric vehicles and hybrid electrical vehicles (including plug-in hybrid electric vehicles) [ 5 ]. Depending on the area of application, different battery cell variants are used that have been technically adapted to the respective application [ 6 ].…”