State‐of‐the‐art review on developing lightweight fiber‐metal laminates based on synthetic/natural fibers

Abstract

The development of hybrid materials consisting of alternating layers of metal alloys and polymeric composites has revolutionized the engineering field. These metal‐composite laminates combine the merits of each individual component, forming advanced and promising structures which could be employed for structural applications. The low fatigue crack growth rate and high damage tolerance of these materials are particularly fascinating. When developing metal‐composite laminates with superb functional properties, the combination of several metal surface treatment techniques is a common practice to ensure optimum metal‐composite adhesion. Today, a new cutting‐edge manufacturing technique utilizing nano‐porous network film has been established to get rid of the massive infrastructure of conventional autoclave techniques and produce first‐rate materials. Even though various techniques can be adopted to manufacture metal‐composite laminates, the selection of the techniques is highly dependent on the nature of the polymer matrix. After the manufacture of the metal‐composite laminates, post‐stretching is considered a critical step to alleviate the unfavorable residual stress to ensure the optimum performance of these materials for long‐term service. When dealing with natural fibers, it is worth mentioning that the processing temperature should be limited to below 200°C regardless of manufacturing technique to avoid fiber degradation. Metal‐composite laminates consisting of synthetic/natural fibers are considered a viable option to offset the demerits of each kind of fibers. By incorporating fatigue‐resilient natural fibers in the laminates, it is expected that the overall fatigue resistance of the laminates can be apparently enhanced, which is in line with the initial goal of developing metal‐composite laminates.Highlights Fiber bridging offers fiber‐metal laminates with superior fatigue properties. Metal surface treatment is vital to ensure an optimum fiber‐bridging mechanism. A novel out‐of‐autoclave method can produce first‐grade fiber‐metal laminates. Post‐stretching is needed to lessen residual stress in fiber‐metal laminates. Hybrid fiber‐metal laminates are feasible for structural applications.

Performance Analysis of Helical Milling and Drilling Operations While Machining Carbon Fiber-Reinforced Aluminum Laminates

“…They consist of Fiber Reinforced Polymers (FRPs) sandwiched between thin metal/alloy sheets, combining the strength of metals/alloys with the exceptional strength-to-weight ratio of FRPs. Presently, the skin panel of the upper fuselage of the aircraft is being built primarily by the use of FMLs [1].…”

Insights on the bearing response of glass fiber‐reinforced stainless steel laminates: Investigating the influence of natural fiber and specimen geometry

“…7,8 Efforts have been dedicated to advancing this technology further by exploring steel laminates with varying material compositions, leading to the emergence of steel-based fiber metal laminates. 9,10 In a noteworthy contribution, Kanerva et al 11 undertook the fabrication of steel fiber metal laminates, utilizing stainless steel grade 304 in conjunction with glass fiber and epoxy. The resulting material was subjected to rigorous testing to determine its Young's modulus, reflecting the collaborative efforts to optimize the mechanical properties of steel-based laminates.…”