Static and Vibration Analyses of a Composite CFRP Robot Manipulator

Abstract

This paper reports analyses of a 5-degrees-of-freedom (5-DOF) carbon fiber-reinforced polymer (CFRP) robot manipulator, which has been developed for farm applications. The manipulator was made of aluminum alloy (AA) and steel materials. However, to check the effectiveness of CFRP materials on the static and free-vibration performance of the manipulator, the AA parts were replaced with CFRP. For this purpose, the effects of various cross-sections and layups on three design criteria—deflection, load-carrying capacity, and natural frequency—were investigated. Two types of thin-walled laminated sections, specifically the I section and rectangular tubular sections, were used for the composite parts. These parts were made from three hollow square section (“SSS” section) beams and three I section (“III” section) beams. These multi-cell beams were modeled using the finite element (FE) method. Three configurations were selected for analysis based on the manipulator’s most common operating conditions. The results indicated that the use of CFRP increased the manipulator’s natural frequencies, increased the load-carrying capacity, and decreased the manipulator’s tip deflection when compared with its AA counterpart. An analysis showed that using CFRP in the manipulator’s structure could improve static and vibrational performances. It was observed that the “SSS” section beams were 1.17 times stiffer, could carry a 1.20 times higher load, and were 1.40 times heavier than the “III” section beams. Also, decreasing the fiber direction in angle-ply layups from 90° to 0° and adding 0° plies, while keeping the total number of layers constant, decreased the manipulator’s tip deflection and increased its natural frequencies.

Research on Energy Absorption Characteristics of Bouligand Biomimetic Structure Based on CFRP Composite Materials

“…The selection of fiber layer angles during the lamination process has different effects on the mechanical properties and load distribution of the entire CFRP laminate. Based on the required performance and design specifications of different structures, appropriate lamination angles are chosen [34][35][36][37].…”

Mechanical and vibrational study of raw and surface‐treated ramie fiber hybridized carbon fiber epoxy composites

“…In addition to mechanical properties studies, hybrid composites must also examine their dynamic response to ensure their safety in use. Several researchers [42][43][44][45][46][47] have used analytical and numerical approaches to perform vibrational analysis on composites, and a few researchers 48,49 have investigated the hybrid composites' mechanical and free vibrational studies using experimental methods. Thus, alkali-treated hybrid composite's free vibration studies and mechanical characteristics are vital to examine.…”