Structural and optical properties of nanocrystalline Ni–Zn ferrite thin films

Electrochemical Synthesis of Nanocrystalline Ni0.5Zn0.5Fe2O4 Thin Film from Aqueous Sulfate Bath

“…Therefore, numerous deposition techniques are used for synthesis of required ferrites thin films. They include ferrite plating [7], chemical vapor deposition [8], sputtering [7], dip coating [9], spray pyrolysis [10], and pulsed laser deposition [11] processes. The main difficulties of these methods are that the substrate during or after deposition must be kept at high temperatures, which imposes restrictions on the selection of the substrate material [7].…”

Microstructure, AC impedance and DC electrical conductivity characteristics of NiFe2-xGdxO4 (x = 0, 0.05 and 0.075)

“…[12][13][14][15][16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] However, the efforts towards understanding the effect of the substitution of rare earth (R) ions in spinel oxides are meager. Engineering the materials and development of devices for high frequency applications based on nickel ferrites is clearly dependent upon the fundamental knowledge of electrical behavior of these materials.…”

Synthesis of ultra small iron oxide and doped iron oxide nanostructures and their antimicrobial activities

“…UV-Vis spectroscopy (Shimsdzu UV-1800) was applied to find the concentration of the absorber in a resolution. The UV-Vis absorption spectra of all the samples were obtained and scanning range for the samples was 190-800 nm [18]. Crystallite size (D) of synthesized nanoparticles was determined using Scherrer's equation D = Kλ/β cos θ λ is wavelength, K is constant and β is the full width at half maximum (FWHM) and θ is the Bragg's angle of diffraction.…”