Study and Numerical Simulation of the Electrical Properties of a Duct-Type Electrostatic Precipitator Using Seven Circular Corona Wires: A Review

Abstract

The study of electrostatic precipitators (ESP) is of great importance in powder technology. Different physical and chemical processes occur during its operation. The objective of this investigation is to analyze and observe electrical phenomena using mathematical models such as Poisson's equation and the charge conservation equation. To carry out the simulation two flat plates and seven corona wires are geometrically arranged based on an ESP prototype. The general form of partial differential equations mentioned along with the boundary conditions was written in software and associated with the different parts of the geometry. For example, the electric field onset is calculated by Peak's law and set as one of the boundary conditions for the corona wires. Defining the space charge density distribution is an essential part because the next processes inside of ESP depend on this parameter. A specific method that splits the space charge density is used to solve these PDEs. Besides, a review of the concepts of the particle charging process, particle kinetics, and particle collection is introduced. The results obtained from the simulation such as the electric potential, electric field, and space charge density, agree with those proposed in some investigations.

Numerical Study of Half Wavy and Half W-type Collecting Plates on the Characteristics of Electrostatic Precipitators

“…However, the fundamental concepts are still present. For example, boundary conditions, the usage of negative corona discharge for a better performance [2], and also Peek's law, which describes the onset electric field [1][2][3][4][5][6][7]. Certain studies show how changes in the geometric design of ESPs affect their electrical properties while also helping to boost their efficiency levels, then the question of how to improve ESP performance with a better design is brought.…”