Study of Physico-Chemical and Anti-Wear Properties of Motor Oils at the End of Operation

Abstract

There is given the study of viscous properties of engine oil, depending on the temperature before and after change on modern domestic gasoline and diesel cars, the determination of spectral characteristics and X-ray fluorescence analysis of wear particles after mileage. The degree of viscosity of semi-synthetic oils of two types is estimated. The oils were cooled and heated up to 150 °C. A digital viscometer was used, the dynamic viscosity of all oils decreased with increasing temperature, which is associated with oxidation in waste oil. To assess the effect of motor oil on engine operation, IR spectrometric analysis is performed and the thickness of the lubricating film is determined. The test results showed a qualitative and quantitative change in the characteristic frequencies of the new engine oil and the spent one after 10,000 km. X-ray fluorescence analysis makes it possible to analyze wear products and determine which mechanism in the engine is most susceptible to wear. Lines have characteristic absorption frequencies and indicate a change in physico-chemical properties of oil in the engine. An increase in contamination and in the viscosity of used oils is associated with the presence of impurities formed during the oxidation and polymerization of the base oil. It is necessary to increase the number of samples and sampling during different periods of operation so that you can verify the same effect throughout the entire engine operation. The results obtained indicate that these methods can be used to analyze and control the mode of operation of oils in the engine, allowing to determine the wear and further apply appropriate additives to the oil to improve performance properties.