Study on resistance performance of hexagonal hull form with variation of angle of attack, deadrise, and stern for flat-sided catamaran vessel

Abstract

The flat-sided hull vessel was designed with the purpose of simplifying hull production by eliminating the requirement for fairing, bending, and assembly of curved panel lines. Nevertheless, implementing the flat hull concept may marginally increase the hull resistance. The objective of the study is to investigate the impact of the hexagonal hull concept on resistance characteristics when altering the deadrise angle, angle of attack, and stern angle. Additionally, the resistance performances of the proposed hexagonal hulls were compared to evaluate the influence of the hull design geometry parameter. The contribution of this work is to identify the configuration of the design parameters to achieve an ideal level of resistance in a hexagonal catamaran hull design. The findings indicate that a greater angle of attack could potentially enhance wave generation and increase the resistance. Despite the increase in the wave resistance coefficient caused by the increment in deadrise angle, the overall resistance was reduced due to the significant reduction in wetted surface area resulting from the greater deadrise angle. As a result, the decrease in friction resistance was more pronounced than the increase in wave resistance. At last, the stern angle can cause a substantial oscillation in the curved line, resulting in a large increase in wave generation and overall resistance, particularly at high speeds.