Study on the Expansion Force of TWIP Steel Expandable Tubular in Solid Expandable Tubular Technology

Abstract

This paper focuses on the expansion process of twinning-induced plasticity (TWIP) steel tubular undergoing the large circumferential plastic deformation in expandable tubular technology. The expansion process was performed by propagating a mandrel through the tubular mechanically. This paper aimed at developing the mathematical models to predict the expansion force required for the radial expansion of the TWIP steel tubular using the rigid-perfectly plastic model and the linear hardening rigid plastic model, respectively. The volume incompressible condition together with the Tresca yield criterion was used to describe the plastic behavior of the tubular material in the expansion process. Besides, the finite element analysis of the expansion process was developed using the commercial software abaqus to validate the theoretical results and determine the scope of application of the derived expansion force formula. Further to this, the effect of the process parameters, such as the expansion ratio, friction coefficient and the cone angle, on the expansion force was investigated. It was found that the expansion force difference of two models have similar variation trend. The accuracy and applicability of the expansion force formula using the linear hardening rigid plastic model improve as the expansion ratio increases and the expansion cone angle decreases.

Study on the Low Plastic Behavior of Expansion Deformation of Austenitic Stainless Steel

“…Twinning-induced plasticity steel, usually called TWIP steel, has a stable austenitic structure at room temperature; high elasticity, strength, and elongation; and good low-temperature properties and strain hardening properties. These properties have attracted both domestic and widespread attention in global high-tech fields such as automobiles and petroleum [10][11][12][13].…”

Study on the Technology of Solid Expandable Tubular in Open-Hole Well

“…After decades of development, it has achieved tremendous development in plugging, repairing casing, and optimizing the wellbore structure [4]. In recent years, a large number of scholars and engineers have conducted research on many aspects of the technologyThey mainly focused on the selection of materials, the optimization of the expansion cone, the collapse after expansion, the expansion force, etc., and achieved remarkable achievements [5][6][7][8][9][10][11][12][13][14]. In general, there are few studies on open hole wells, and these studies are mainly on casing damaged wells [15].…”