Borehole and d a c e recordings of Nevada Test Site nuclear explosions provide the only data available for characterization of ground motions at the potential repository depth at Yucca Mountain. Triaxial accelerometer pairs were located from 1980 to 1990 at four boreholes in the Yucca Mountain area; three of these boreholes are aligned in a northsouth profile traversing the potential repository (with downhole instrumentation at 350-375 m depth) while the fourth was located near the suggested site for the associated surface facilities (instrumentation at 82m depth). Thirty-seven nuclear tests recorded at these locations have yielded 86 surfacddownhole data pairs usefd for modeling nearsurface seismic structure.We have used the propagator matrix method of calculating the fill plane wave response for body waves incident on a layered structure to develop synthetic onedimensional transfer functions for each of the four borehole stations. The velocity models used for calculating the transfer finctions are based on available geologic, seismologic, and well-log information for Yucca Mountain, and were developed using forward modeling. The transfer h c t i o n is the ratio of the spectral response at the depth of the downhole instrument to that at the surface instrument. Convolution of the transfer function with the actual surface seismogram yields a synthetic downhole record that is compared to the data. The modeling process results in one-dimensional velocity models for the four borehole locations. We used the models for the three stations in the northsouth profile to construct a two-dimensional velocity model for the uppermost 350m of Yucca Mountain. While none of the boreholes intersect the potential repository, the twodimensional model provides a means to predict motions at the actual repository location and depth for a specified sudkce seismogram...
ll
DISCLAIMERPortions of this document may be illegible in electronic image products. Images are produced from the best available original document.
DISCLAIMERThis report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, rnanuf'acturer, or otherwise does not necessarily constitute or imply its endorsement, mommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. This work was supported by the United States Department of Energy under Contract DE-ACO4-94AL85000 and was prepared under the Yucca Mountain Site Characteri...