Sunflower Oil as a Renewable Resource for Polyurethane Foams: Effects of Flame-Retardants

Abstract

Currently, polyurethane (PU) manufacturers seek green alternatives for sustainable production. In this work, sunflower oil is studied as a replacement and converted to a reactive form through epoxidation and oxirane opening to produce rigid PU foams. Confirmatory tests such as Fourier-transform infrared spectroscopy (FT-IR), gel permeation chromatography (GPC), and hydroxyl value among others were performed to characterize the synthesized polyol. Despite the versatility of rigid PU foams, they are highly flammable, which makes eco-friendly flame retardants (FRs) desired. Herein, expandable graphite (EG) and dimethyl methyl phosphonate (DMMP), both non-halogenated FR, were incorporated under different concentrations to prepare rigid PU foams. Their effects on the physio-mechanical and fire-quenching properties of the sunflower oil-based PU foams were elucidated. Thermogravimetric and compression analysis showed that these foams presented appreciable compressive strength along with good thermal stability. The closed-cell contents (CCC) were around 90% for the EG-containing foams and suffered a decrease at higher concentrations of DMMP to 72%. The burning test showed a decrease in the foam’s flammability as the neat foam had a burning time of 80 s whereas after the addition of 13.6 wt.% of EG and DMMP, separately, there was a decrease to 6 and 2 s, respectively. Hence, our research suggested that EG and DMMP could be a more viable alternative to halogen-based FR for PU foams. Additionally, the adoption of sunflower polyol yielded foams with results comparable to commercial ones.

Bio‐based rigid polyurethane foam composites reinforced with flame retardants: From synthesis to performance evaluation

“…The plasticizing effect of DMMP could have led to this transition. Asare et al 18 reported similar morphological changes with the incorporation of DMMP at different concentrations into the sunflower oil-based RPUFs.…”

Role of crosslinkers on the properties of bio‐based wood adhesives

“…The retention time for SO, ESO, and SOP was observed to be about 32.06, 32.31, and 32.04 min, respectively. In addition, a shoulder appeared at the retention time of around 30.38 min for SOP, which may have resulted from dimers formed as a byproduct of the reaction from ESO to SOP 22 . The molecular weights and polydispersity index (PDI) of the compounds can be estimated using a calibration curve in GPC.…”

A review on vegetable oil-based non isocyanate polyurethane: towards a greener and sustainable production route

“… 101 Additionally, Asare et al prepared a polyol from sunflower oil, reacted it with methylene diphenyl diisocyanate to produced rigid polyurethane foams. 102 Fig. 18 displays the image of sunflower seeds and the chemical structure of the oil.…”