The microbial electrolysis cell (MEC) is an emerging technology for bioenergy production using organic wastewater. Normally, a preassimilated bio-anode is utilized by the MEC to break down the organic content, but the formation and assimilation of microbial community at the anode surface is a time-consuming process. This study utilized a novel unassimilated Ni-foam anode for the first time in solar-powered MEC for bioenergy production. Synthetic dairy manure wastewater (SDMW) was used both as substrate and an inoculum in the solarpowered tubular MEC. The impacts of the exposed surface area of the bio-anode on bioenergy production were evaluated by utilizing two different separation techniques (rate-limited bio-anode -MEC and fully exposed bio-anode -MEC). The former technique achieves a maximum methane production rate of 30.35 ± 0.03 mL/L, 14.2% more than that achieved by the later mentioned technique (26.4 ± 0.05 mL/L). Hydrogen production was approximately 800 ± 5 mm 3 in both experimentations. The maximum generated current in the rate limited bioanode -MEC was 35.5 mA. Scanning electron microscope images confirmed the formation of rod-shaped along with round-shaped microbial communities on the anode surface, and, interestingly, round-shaped bacteria were also grown on the cathode surface. The bioenergy (H 2 and CH 4 ) produced using SDMW within first 13 days of operation, along with the formation of a microbial community, was a significant success in this area and has opened up many research opportunities for producing instant bioenergy from organic waste.