Synthesis and characterisation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) Zr(IV) monothiophosphate composite cation exchanger: analytical application in the selective separation of lead metal ions

Rangreez, Tauseef Ahmad; Inamuddin, .; Naushad, Mu.; Ali, Hasimah

doi:10.1080/03067319.2015.1036863

Cited by 22 publications

(5 citation statements)

References 41 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…Currently, several methods are used for the treatment of wastewater effluents. Among these includes precipitation with coagulation and flocculation, ion exchange (Eltayeb & Khan, 2019;Khan et al, 2019;Khan, Khan, Asiri, & Sirajuddin, 2018;Khan, Khan, Rahman, & Asiri, 2016;Rangreez, Inamuddin, Mu, & Ali, 2015;Khan et al, 2014, 2013, Khan and khan, 2010Khan Ali, Habiba, & Khan, 2009), complexation of dry biomass, filtration and adsorption (Çalımlı et al, 2019, Demirbaş et al 2019aand Demirbaş et al 2019bMetcalf and Eddy, 2003). But, some of these methods such as precipitation and ion exchange have significant drawbacks which are associated with their high costs, less efficiency, requiring large amounts of reagent and solvent and generation of toxic sludge.…”

Section: Introductionmentioning

confidence: 99%

“…But, some of these methods such as precipitation and ion exchange have significant drawbacks which are associated with their high costs, less efficiency, requiring large amounts of reagent and solvent and generation of toxic sludge. Therefore, there is a great demand for developing cheaper, environment-friendly and efficient heavy metal treatment procedures to minimize the amount of toxic heavy metals from industrial effluents (Isloor et al, 2019;Kolangare, Isloor, Asiri, & Ismail, 2019;Kumar et al, 2019;Rangreez et al, 2015;Tchobanoglous, Burton, & Stensel, 2003).…”

Section: Introductionmentioning

confidence: 99%

See 1 more Smart Citation

Removal of heavy metals from aqueous solutions using Eucalyptus Camaldulensis: An alternate low cost adsorbent

2020

View full text Add to dashboard Cite

Section: Introductionmentioning

confidence: 99%

Section: Introductionmentioning

confidence: 99%

Removal of heavy metals from aqueous solutions using Eucalyptus Camaldulensis: An alternate low cost adsorbent

2020

View full text Add to dashboard Cite

“…Alkali and alkaline earth metal nitrate solutions (1 M) were passed through the columns containing 1 g of cation exchange material to elute the H + ‐ions completely. The effluent was titrated using sodium hydroxide solution (0.1 M) and phenolphthalein indicator .…”

Section: Methodsmentioning

confidence: 99%

Synthesis of single‐walled carbon nanotubes cerium(IV) phosphate composite cation exchnager: Ion exchange studies and its application as ion‐selective membrane electrode for determination of Cd(II) ions

2015

Self Cite

View full text Add to dashboard Cite

Single‐walled carbon nanotubes cerium(IV) phosphate composite cation exchanger was synthesized using sol−gel method. The ion‐exchange properties such as elution concentration, elution behavior and effect of temperature on ion exchange capacity were studied. The composite cation exchange material showed an ion‐exchange capacity (IEC) of 1.64 meq dry g−1 of ion exchanger. The distribution studies revealed that the composite cation‐exchanger is highly selective for Cd(II) ions. The material was used as an electroactive component for the construction of a cadmium ion‐selective membrane electrode. The membrane electrode showed a Nernstian response for Cd(II) ions over a wide concentration range of 1 × 10−7−1 × 10−1 M with a sub‐Nernstian slope of 27.429 mV per decade change in concentration of cadmium ions. The limit of detection was found to be 1 × 10−7 M. It possessed a fast response time 10 s and can be utilized for 130 days without any considerable divergence in response potential. The practical utility of membrane electrode was demonstrated by employing as an indicator electrode for the potentiometric titration of Cd(II) with ethylenediamine tetra acetic acid, disodium salt (EDTA). POLYM. COMPOS., 38:1005–1013, 2017. © 2015 Society of Plastics Engineers

show abstract

“…Sodium nitrate solution (1 M) was used to elute the H + ‐ions completely from the column. The effluent was titrated using sodium hydroxide solution (0.1 M) and phenolphthalein indicator . On the basis of IEC, sample S‐12 was selected for further studies (Table ).…”

Section: Methodsmentioning

confidence: 99%

Zinc selective nano‐hybrid cation exchanger carboxymethyl cellulose Zr(IV) tungstate: Sol‐gel synthesis, physicochemical characterization, and analytical applications

et al. 2015

View full text Add to dashboard Cite

Nano‐hybrid cation‐exchanger, carboxymethyl cellulose Zr(IV) tungstate was synthesized in the presence of surfactant. Physicochemical properties like thermal stability, surface morphology, particle size, and composition were evaluated by using thermogravimetric analysis/diffrential thermal analysis/diffrential thermogravimetry (TGA/DTA/DTG), X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), transmission elctron microscopy (TEM), and energy dispersive X‐ray (EDX) techniques. The ion exchange properties such as ion exchange capacity, elution behavior, eluent concentration, thermal effects, and pH titration were also performed to validate ion exchange behavior of synthesized material. Incorporation of carboxymethyl cellulose into the matrices of inorganic gels of Zr(IV) tungstate resulted enhanced ion exchange capacity and better mechanical stability of nano‐hybrid cation exchanger. A series of experiments were carried out for selective separation of Zn(II) ions from aqueous solutions of two‐component mixtures of heavy metal ions such as Zn(II)‐Hg(II), Zn(II)‐Cd(II), Zn(II)‐Ni(II), and Zn(II)‐Mg(II). The distribution studies showed that the synthesized nano‐hybrid cation‐exchanger is highly selective to Zn(II) ions. POLYM. COMPOS., 38:2057–2066, 2017. © 2015 Society of Plastics Engineers

show abstract

Synthesis and characterisation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) Zr(IV) monothiophosphate composite cation exchanger: analytical application in the selective separation of lead metal ions

Cited by 22 publications

References 41 publications

Removal of heavy metals from aqueous solutions using Eucalyptus Camaldulensis: An alternate low cost adsorbent

Removal of heavy metals from aqueous solutions using Eucalyptus Camaldulensis: An alternate low cost adsorbent

Synthesis of single‐walled carbon nanotubes cerium(IV) phosphate composite cation exchnager: Ion exchange studies and its application as ion‐selective membrane electrode for determination of Cd(II) ions

Zinc selective nano‐hybrid cation exchanger carboxymethyl cellulose Zr(IV) tungstate: Sol‐gel synthesis, physicochemical characterization, and analytical applications

Contact Info

Product

Resources

About