The development of epoxy resin (EP) potting material with high thermal conductivity (TC) and excellent electrical insulating properties plays an important role in the development of drive motors to high specific power and high voltage. In this study, a simple preparation method is presented to solve the problem of low content filler settling and low TC of EP. Firstly, small‐sized perfluoroalkyltrimethoxysilane surface‐treated nanodiamond (ND) and large‐sized hydroxylated boron nitride (BN) were adsorbed together using hydrogen bonding to construct “Sesame Cookie”‐like structures. The heterostructure filler with different “sesame” contents were obtained by modulating the ND:BN ratio, and were filled into high‐temperature resistant AG70 EP at a fixed mass ratio of 20 wt.%. By surface treatment, the dispersibility of fillers in EP was improved, and the settling problem of low content fillers was solved. Finally, when the ratio of ND: BN is 1:2, the TC value of EP composite reached 0.94 W·m−1·K−1, which was 348% higher than pure EP, and the composite possessed good electrical insulating properties. In addition, the heat‐resistance temperature of the composite exceeded 200°C, which ensured the stable operation of the drive motor. This study presents new ideas for the exploitation of EP potting materials with high TC and excellent electrical insulating properties.Highlights
Heterostructure filler is constructed using hydrogen bonding.
Dispersion of the filler in the EP is improved by surface treatment.
The TC value of the EP composite increased by 348%.
The heat‐resistant temperature of the EP composite is more than 200°C.
The EP composite has excellent insulating properties.