Synthesis of TiO₂nanoparticles at low hydrothermal temperature and its performance for DSSC sensitized using natural dye extracted fromMelastoma malabathricumL. seeds

Abstract

Summary Efficiency of a dye‐sensitized solar cell (DSSC) device depends on its semiconductor layer and the sensitizing dye to absorb the light. This work seeks to obtain the best solvent for the natural dye extraction from Melastoma malabathricum L. seeds. The extracted dye is used as sensitizer on TiO2 nanoparticles produced via hydrothermal but optimized at relatively low temperature. Infrared characterization of the extracted dyes showed differences in functional groups using different solvents, whereas ultraviolet visible examination of the dyes showed differences in intensity along the spectrum ranges of 600 to 400 nm with maximum absorption around 550 to 500 nm. Thermal analysis revealed that the natural dye should be stable around room temperature. Analysis on the synthesized TiO2 nanoparticles showed that the average crystallite size reported in the previous work is consistent with crystallite sizes observed in the transmission electron microscope images. Photoactivity examination showed that the DSSC sensitized using natural dye extracted with ethanol containing 20% distilled water on TiO2 synthesized at 150°C has an efficiency of 5.7%, whereas the one on commercial TiO2 P25 Degussa has an efficiency of 3.0%. The DSSC device sensitized using commercial dye on TiO2 synthesized at 150°C has an efficiency of 4.4%, whereas the one on TiO2 P25 Degussa has an efficiency of 4.0%. This result is promising for further development of the DSSC device using TiO2 nanoparticles synthesized at low hydrothermal temperature and sensitized with the natural dye.

ZnO-based antimicrobial coatings for biomedical applications

“…to potentially inhibit nosocomial infection, because it utilizes the abundant and natural sunlight. In the last decades, transition metal (TM) semiconductors photocatalyst can be potential candidates as inactivation microbial species, and the followings are the most recognized and studied materials: TiO 2 , ZnO, WO 3 , MoO 3 , and CeO 2 [ 50 – 55 ]. However, some of the semiconductors corrode and degrade during photocatalytic reactions thus resulting the dissolution of semiconductor materials in the reaction system.…”

Mapping the Progress in Natural Dye‐Sensitized Solar Cells: Materials, Parameters and Durability

“…[20,279] Requires straightforward chemical procedures, which reduces the production cost of natural dye. [286] Manufacturing process…”

Growth Control of SnO2 Nanoparticles Using a Low-Temperature Solution Process

“…The solvothermal method is analog to the hydrothermal method except that they are carried out in non-aqueous media. The disadvantage of these two methods is the high temperature and pressure, and the high cost of the autoclave to run at temperatures and pressures of up to 300 and 10 bar, respectively [3,4]. The sol-gel method (chemical solution deposition) avoids the previously mentioned disadvantages and is a well-established synthetic approach for the preparation of metal oxides.…”