Synthesis Route to Single-Walled Zeolite Nanotubes Enabled by Tetrabutylammonium Hydroxide

Abstract

Single-walled zeolite nanotubes (ZNT) were recently synthesized in a narrow compositional window. ZNT structural features�thin zeolitic walls and large mesopores�can allow for easy access of small molecules to zeolite micropores, but they also impart processing limitations for these materials, such as challenges with conventional aqueous ion-exchange conditions. Conventional solid-and liquid-phase ion exchange of calcined NaOH-derived ZNT (NaH-ZNT) results in structural degradation to either 2D sheet-like phases, 3D nanocrystals, or amorphous phases, motivating different direct synthesis routes and unconventional ion-exchange procedures of uncalcined ZNT precursors. Here, a modified synthesis route for ZNT synthesis is introduced that facilitates facile ion exchange as well as incorporation of additional non-Al heteroatoms in the zeolite framework. Tetrabutylammonium hydroxide (TBAOH) is used as a hydroxide source and co-OSDA, enabling synthesis of new compositions of ZNT, otherwise unachievable by post-modification of previously reported NaH-ZNT. By varying the gel composition, synthesis temperature, crystallization time, hydroxide source, silicon source, and aluminum source, productive conditions for the new TBAOH synthesis are developed, leading to increased strong acid site density in the ZNT. The collected results demonstrate the sensitivity of the ZNT synthesis to many key parameters and show that the ZNT forms only when Si/(Al + T) ∼ 30 in these synthesis gels and with specific Si and Al sources, and always in the presence of trace Na + . Catalytic testing, via the tandem CO 2 hydrogenation to methanol and methanol to aromatics reaction, shows that ZNTs provide adequate catalytic activity (acidity), relative to their conventional 3D counterparts in converting methanol to aromatic compounds.