System Development for Diffusion Bonding of Multiple Unit Tubes to Produce Long Tubular Tungsten Heavy Alloys

Abstract

A diffusion bonding system to fabricate long tubular parts by joining of two- or more-unit tubes made of tungsten heavy alloys (THAs) is proposed and characterized in this study. The difficulty of powder processing of THA originates from the weak strength of the green compact and the high weight of the THA powders. The long tubular green compact is difficult to handle due to its weak structural integrity. Furthermore, gravity-induced slumping during liquid phase sintering induces dimensional distortion and degrades the mechanical performances. As a clue for solving these problems, the unit tubes are fabricated. However, the mass of green compacts for unit tubes is not sufficiently great as to cause problematic slumping; tubular unit tubes can be obtained without significant difficulty. Fabricated unit tubes are stacked in a furnace chamber and diffusion-bonded to produce a long tubular part having bond strength substantially equal to that of a monolithic tube. The proposed diffusion bonding system was well characterized and successfully applied to the industrial production line. The feasibility was also confirmed by investigating the bond quality, which can be assessed by metallographic microstructure and mechanical property.

Microstructure and Properties of Tungsten Heavy Alloy Connections Formed during Sintering with the Participation of the Liquid Phase

“…The technologies of permanent connections include: soldering, welding, friction welding and sintering with the participation of the liquid phase [1,[33][34][35][36][37].…”