Technological solutions development for mining adjacent rock mass and pit reserves taking into account geomechanical assessment of the deposit

Self Cite

Purpose. Determining the actual dimensions of the protecting and crown pillars of ore bodies by seismic survey and assessing the possibility of rock mass collapse and fracturing at the lower levels of the Zhairemskoye field. Methods. An integrated approach is used, which involves the analysis of complete ore bodies development during the combined mining. To determine the geological strength index (GSI) and rock mass rating (RMR), the mass structure is studied, as well as the survey is executed of rock fracturing on the contours of mine workings at levels of +288, +240, +192, +144 m. In addition, the physical and mechanical properties of rocks are refined using the RocLab software. Using the numerical modelling of the self-caving process, when mining the protecting and crown pillars, the processed results of numerical modelling are analysed and the possible zones of the mass deformation are assessed based on the Phase2 software. Findings. It has been determined that during the mining of ore bodies 4 and 6, protecting pillars between the quarry and the underground mine, crown pillars between the levels up to the level of +144 m, the rock displacements are possible along glide surfaces. It has been revealed that the haulage workings of levels +240 and +192 m fall into the zone of possible displacements influence, and the rock pillar between ore bodies 4 and 6 will be exposed to inelastic deformations during the mining of crown pillars to the level of +144 m. It has been found that after the crown pillar development between the levels of +240 and +192 m for ore body 6, the rock pillar destructions are possible between ore bodies 4 and 6, since during the modelling, displacements of more than 2 mm are observed. In this case, the destruction processes are possible in the rock pillar upper part. Originality.A geomechanical assessment of the rocks tendency to caving is given and problem areas of stability during the mining of ore bodies 4 and 6 in the Zhairemskoye field are identified. Practical implications. The stable parameters of protecting and crown pillars have been substantiated, which is an important aspect in the design/efficient technology of mining the contiguous ore bodies. Keywords: engineering seismic, ore body, pillar, level, iron, manganese

Section: Figure 5 Computational Scheme For the Numerical Analysismentioning

confidence: 99%

Geomechanics substantiation of pillars development parameters in case of combined mining the contiguous steep ore bodies

Takhanov¹,

Муратулы²,

Rashid³

et al. 2021

Self Cite

“…The ultimate purpose of developing a geomechanical model is to ensure the safety of mining operations by determining the optimal slope angles and probabilistic assessment of the open-pit wall stability, based on studying the structure of the near-wall mass and its physical-mechanical properties [57].…”

Section: Introductionmentioning

confidence: 99%

Substantiating the rock mass control parameters based on the geomechanical model of the Severny Katpar deposit, Kazakhstan

Tolovkhan¹,

Demin²,

Amanzholov³

et al. 2022

Purpose. The research purpose is to develop a geomechanical model for ensuring the safety of mining operations by determining the optimal slope angles and probabilistic assessment of the stability of the open-pit walls. Methods. Three-dimensional geomechanical models for surface mining of deposits have been developed based on calculations of the stability factor (safety factor SF) of the open-pit walls in the Rocscience program to determine the rock mass stress-strain state at the end of mining using the finite element method. The geological wireframe model (GWM) has been built on the basis of the available geological sections, horizon plans and the results of the engineering-geological surveys using the Surpac geoinformation system. Findings. Strength reduction factor (SRF) has been determined taking into account the physical-mechanical properties of rocks that constitute the near-wall mass. An assessment of the stability of walls according to the selected geological sections is given, taking into account the projected contour of the Severny Katpar open-pit walls. The calculation of the projected contour stability of the open-pit walls by several different methods has revealed that the open-pit walls are generally stable. The open-pit parameters at the end of mining have been determined. Originality. For the first time, it has been determined that in the Southern and South-Western area of the Severny Katpar open-pit wall in the horizons +700…+400, there is a decrease in SF from 1.18 to 1.41 due to the predominant occurrence of siltstones and tectonic disturbances of the walls. Practical implications. The mathematical calculation results of the stability of the projected contour walls in the Severny Katpar open pit have been generalized. In addition, a geological and structural wire-frame model of the deposit has been developed, which makes it possible to ensure the safety of mining operations in the open pit.

“…The effectiveness of using one or another open-pit transport scheme depends on the level of technical and economic indicators both directly during the rock mass transportation and during related cargo operations. In this case, the organization of transshipment operations with the simultaneous use of dump trucks and road trains in one direction of rock transportation is of great importance [30]- [32].…”

Section: Introductionmentioning

confidence: 99%

Substantiation and development of innovative container technology for rock mass lifting from deep open pits

Khussan¹,

Abdiev²,

Bitimbayev³

et al. 2022

Purpose. The research purpose is to substantiate the rational parameters of innovative container technology for transporting mine rocks in open pits with account of technological advantages. Methods. The winding machine normal operation was determined by calculation performed. The container metal structure was designed in the environment of the Compass-3D software complex. The structural elements were tested for normal operation using computer modeling methods in the APM WinMachine 9.7 program, which gives the possibility to obtain the strength calculation values. Findings. The results of modeling the stresses on the wall of the container and the frame, as well as the yield strength are presented. The test calculation confirms the technical feasibility for operating the dragline-based mine winding machines. The influence of the container capacity on the performance of the winding machine has been determined and the dependence of the economic efficiency of the container technology introduction at the open pit depth has been revealed. Originality. For the first time, on the basis of computer modeling, the parameters of stress distribution on the container wall have been substantiated when performing a strength calculation. It has been determined that the maximum stress in the container wall is 117.52 N/mm2; the principal stress value is 83.85 N/mm2. The safety factor for yield strength is 1.8. The maximum load acting on the structure is 957.5 kgf, which does not exceed the calculated value. Practical implications. The practical importance is to improve mining efficiency, reduce the cost of transporting rocks and ensure automatic container unloading. The use of replaceable containers in open pits can significantly change the formation principles of shovels and transport complexes, increase their performance and the efficiency of shovels in the main processes.