Tennis Shoe Outsole Temperature Changes During Hard Court Sliding and Their Effects on Friction Behaviour

Abstract

Tennis is a sport played around the world on a variety of surfaces like grass, clay and hard courts. The types of surface and the surface properties influence the movements that are used by players. On hard courts, players have recently increased their tendency to perform sliding movements, possibly to reposition faster and be ready for the next shot. In order to enhance player's performance and reduce injury risk, there is a need to understand the tribological mechanisms occurring at the shoe-surface contact. The present study has developed an effective method to accurately measure temperature changes throughout a sliding movement. Friction and temperature measurements of a commercial tennis shoe outsole were measured during simulated sliding over hard court surfaces. Results indicated how the temperature changed during and after a slide. Additionally, it was found that the temperature of the shoe sole is significantly affected by the vertical load applied, and this varies depending on the shoe location tested. It was also found an inconsistent effect of surface roughness under a range of vertical loads tested. For multiple sliding tests during a rally, the shoe will increase temperature incrementally for each new slide, which could result in large changes in friction behaviour during a slide. The findings from this study could have important implications for the sport of tennis, both in terms of performance and injury-risk.

The Influence of Additional Surface on Force Platform’s Ground Reaction Force Data During Walking and Running

“…One of the possible way to determine the requirement to replicate the exact same surface interaction between the real condition and laboratory analysis, or not to, is by knowing the range of the ground reaction force magnitudes of the movement to be analyzed. This is because, under high vertical loading, the adhesion friction element dominates the two surfaces in contact, whereas low vertical loading is dominated by hysteretic friction element [17]. This information might be important when considering a new experiment design which requires force plate application.…”

Feasibility of application of finite element method in shoe slip resistance test

“…Ura et al [4] studied temperature's influence on outsole slip resistance. Besides, there have been several studies [5][6][7][8] focused on the effect of outsole pattern. Li et al [6] investigated the effect of depth of outsole pattern on slip resistance.…”