To reduce aquatic eutrophication, measurements of bioavailable phosphorus (BAP) rather than total phosphorus (TP) are deemed critical. However, current methods require much time to separate sediments from river water, which limits the routine measurement of BAP in rivers. Therefore, in this study, a simultaneous multisample ultrasonic extraction method is proposed to directly measure total BAP (TBAP) in river water without the separation of sediment and water. Spike-and-recovery assessments showed that at least three extractions are required to maintain efficiency. A process including 2-min extraction time and three extractions was suggested. The concentrations of TBAP extracted by this process showed no significant differences with the spike calculations. Furthermore, river water TBAP was quantified using the conventional and proposed method to examine the practicality of using the proposed method for simultaneous multisample ultrasonic extraction and to evaluate its adaptability to actual river water analysis. The extracted concentrations matched those obtained using the conventional method, in which total BAP is calculated as the sum of dissolved BAP and particulate BAP; no significant difference was observed between the concentrations. Ultrasonic extraction was considerably less time-consuming than the conventional method because more samples could be analyzed during a single run. Therefore, the simultaneous multisample ultrasonic extraction method proposed in this study can be used to directly quantify total BAP in river water.