The Effect of Hydraulic Conditions in Barbotage Reactors on Aeration Efficiency

Abstract

Barbotage reactors such as airlift reactors (ALR) and bubble column reactors (BCR), due to their two-phase flow systems, were investigated in many research papers. In their basic design variants, they are typically used to lift, mix, and aerate liquids, while, when equipped with additional elements in hybrid variants, their individual properties, i.e., lifting, mixing, and aeration of liquids, can significantly change with the same reactor geometry. The object of this study was to develop a hybrid barbotage reactor in various structural design variants. The structure consisted of a barbotage column of 50 mm in diameter, used to transport a water–air mixture outside the reactor (so-called external loop). The installation was additionally equipped with a nozzle in order to improve mixture aeration and circulation efficiency. The nozzle was mounted at various heights of the column pump segment. Additionally, the reactor was equipped with s moving bed in two variants (20% and 40% reactor capacity) in order to determine its effect on the mixture aeration and circulation conditions. Based on the measurement results, aeration curves were prepared for various structural design and column packing variants of the reactor. Properties of the two-phase mixture were determined for both parts—ALR and BCR. Technological and energy parameters of the aeration process were calculated, and the results obtained for the individual structural design variants were compared. It was found that, for the most advantageous design, in terms of aeration efficiency, the aeration nozzle should be placed in the mid-length of the pump segment of the barbotage column, irrespective of the hybrid reactor packing rate with the moving bed. The reactor packing with the moving bed resulted in a decreased mean water velocity in the reactor. For most analyzed structural design variants, the respective packing with the moving bed had no significant effect on aeration efficiency. Only for one structural design variant did the lack of packing significantly improve oxygen levels by as much as approximately 41%.

Innovative Aeration and Treatment Technologies Supporting the Process of Revitalization of Degraded Water Reservoirs

“…The advantages of MBBR (moving bed biofilm reactor) reactors include high tolerance to water temperature changes and heterogeneity of charges during the treatment process (Andreottola et al, 2000;Ødegaard, 2004;Leiknes and Ødegaard, 2007;McQuarrie and Boltz, 2011). The efficiency of the reactors depends, inter alia, on the types of moving beds (biomass carriers) used (Kujawiak et al, 2017(Kujawiak et al, , 2018(Kujawiak et al, , 2020. New moving bed technologies, e.g.…”

Analysis of the Possibility of Management of Curly-Leaf Pondweed for Energetic Purposes

“…One way to prevent water decline is to bring fresh water from rivers [41]. However, this method is rarely feasible, as waters flowing from the catchment are often more polluted than lake waters [42][43][44]. However, it is possible to dispose of aquatic vegetation to reduce the nutrients in the water.…”