The effect of oxygen on formation of syngas contaminants during the thermochemical conversion of biomass

Abstract

The effect of oxygen on the formation of syngas contaminants during the thermochemical conversion of carbonaceous feedstocks has been quantified using an integrated biorefinery plant operated at a biomass input of about 4.5 metric tons/day. This plant combines solids steam reforming and gases steam reforming processes for the conversion of biomass to syngas. It was found that the presence of low concentrations of oxygen (in air) during the thermochemical conversion process had a significant effect on the formation of contaminants in the syngas. For example, particulate organic carbon compounds (organic particulate contaminants) increased from 3.3 to 122 mg/m 3 when the oxygen input was increased from 225 ppm to 4.1 vol.% during the thermochemical conversion of wood to syngas. It is proposed that the primary free radical ( Ã ) species H Ã , OH Ã , O Ã , CH 3 Ã and OOH Ã , formed from the presence of O 2 in this high-temperature process, react with the myriad of organic compounds in the syngas at varying rates, depending upon their structure and reactivity. These processes represent the primary chemical mechanisms for the formation of high molecular weight hydrocarbons, polynuclear aromatic hydrocarbons, oxygenated hydrocarbons and polymeric materials, commonly referred to as organic particulate contaminants. The potential importance of these free-radical oxidation processes was supported by measuring the concentrations of selected oxygenated hydrocarbons in the syngas over a range of 225 ppm to 4.1 vol.% of O 2 in the thermochemical process. The concentrations of oxygenated polycyclic aromatic hydrocarbons (hydroxy-naphthalene, dihydroxy-naphthalene, dihydro-indene-2-one, and benzopyranone) increased by 732, 244, 83 and 195 times, respectively, when the oxygen concentration was increased from 225 ppm to 2.5 vol.%. These increases were due to the free-radical oxidation of the highly reactive PAHs during the thermochemical processes. The importance of these oxidation processes was further confirmed by studying the decrease of easily oxidized olefins. For example, the concentrations of 1,3-butadiene, acetylene, propene and ethene decreased by 9.3, 5.2, 4.5 and 3.4 times, respectively, when oxygen in the plant was increased from 1.6 to 2.5 vol.%. It is concluded that the formation of organic particulate contaminants during the thermochemical conversion of carbonaceous feedstocks can be minimized by maintaining the concentration of oxygen below 500 ppm.

Foliar heavy metal uptake, toxicity and detoxification in plants: A comparison of foliar and root metal uptake

“…Few studies proposed a radical approach to address this disposal problem by incorporating a thermochemical conversion of contaminated plant material to energy followed by heavy metal recovery [305], which is considered as one of the most economical and safe approaches of utilizing the contaminated plant biomass. Gasification and combustion are important approaches used for producing thermal and electric energies from contaminated plant biomass.…”

A Review on Anaerobic Co-Digestion with a Focus on the Microbial Populations and the Effect of Multi-Stage Digester Configuration

“…Several treatment processes and technologies have been established to obtain sustainable and affordable biofuel, for example Syngas (SNG) is a synthetic gas produced by gasification of a carbon containing fuel that has some energy value. However, production of SNG is narrowly practiced due to the high cost of this process [9,10].…”

An Overview of Low-Temperature Fischer–Tropsch Synthesis: Market Conditions, Raw Materials, Reactors, Scale-Up, Process Intensification, Mechanisms, and Outlook

“…After this event, interest grew in the construction of GTL modularization plants that are based on unconventional gasmainly in shale, associated, and flared gas. Some companies involved with the current application of the GTL process with the intention of modularization are Greyrock Energy Inc., − Infra GTL Technology, Gas2, Siluria Technologies, , SynFuels, and SGC Energy. , Some companies such as Oberon Fuels, CompactGTL, and Velocys are positioned as having low overall risk and a short time to commercialize the GTL technology of modularized units…”