The influence of Lavandula angustifolia L. oil on corrosion of Al-3Mg alloy

Artemisia Mesatlantica essential oil as green inhibitor for carbon steel corrosion in 1M HCl solution: Electrochemical and XPS investigations

“…Green inhibitors can be used in the form of extracts, essential oils or pure compounds. Previously, some essential oils have been reported as potential corrosion inhibitors, such as Cedre oil [14], Jojoba oil [15], Artemisia oil [16,17], Pennyroyal oil [18], Eucalyptus oil [19,20], Thymus oil [21], Lavandula Angustifolia L. oil [22], Verbena oil [ 23], Eryngium Maritimum [24], Helichrysum Italicum oil [25], Foeniculum Vulgare oil [26], Asteriscus graveolens oil [27], Jasminum oil [28], Oleum palmarosae oil [28] Ocimum basilicum oil [28] and Vetiveria zizanioides oil [28].…”

Recent developments in materials for aluminum–air batteries: A review

“…Halambek et al [103] investigated an ethanol solution of Ocimumbasilicum L. oil as an inhibitor for Al in 0.5 M HCl solution using a weight loss method, potentiodynamic polarization and EIS. The results revealed that the presence of basil oil in the HCl solution caused the current density to decrease; the EIS result indicated that this compound induced the formation of a protective layer on the Al surface.…”

The effect of feldspar and kaolin on mechanical performance of SBR/LDPE composites

“…Baumhara et al [13] reported that the oil of Artemisia mesatlantica is a potential green corrosion inhibitor using aerial parts of the plant, Clove oil was studied as inhibitor for iron in acidic medium [14], Abdulwahab et al [15] investigated the anti-corrosion effect of Avogadro natural oil on mild steel in hydrochloric acid solutions, Afia et al [16] indicate that Argan oil gives adequate protection to the steels in a medium containing 1 M HCl. More recently, Lavender oil has been found to be not harmful to the environment as corrosion inhibitor, Halambek et al [17] have carried out a study on the influence of Lavandula angustifolia L. on corrosion of Al-3 Mg alloy in 3% NaCl solution, the results showed an efficiency of 99% for a concentration of 20 ppm at 25 °C. The study by Znini et al [18] on the uses of Lavandula multifida L. oil as a corrosion inhibitor in 0.5 M H 2 SO 4 medium, showed that the oil exhibited a high inhibition efficiency of 72.2% at 2 g/L of oil at 25 °C, the usage of L. stoechas oil, abstracted from leaves as corrosion inhibitor of stainless steel in H 3 PO 4 solution was elaborated by Boudalia et al [19].…”