The Inhibitory Effect and Adsorption Mechanism of Roasted Elaeis guineensis as Green Inhibitor on the Corrosion Processof Extruded AA6063 Al-Mg-Si Alloy in Simulated Solution

Data on anti-corrosion characteristics of eco-friendly inhibitive extract on the hot corrosion degradation trend of A6063 aluminum alloy in 1.0 M HCl solution

“…From the weight loss result, the corrosion rates were calculated and the inhibitor efficiency obtained. The data obtained shows that the rate of corrosion decreases with increase in the concentration of inhibitors, this is also true for the varying temperature though with increase in time the inhibitor efficiency decreases [3], [4].…”

“…A total of seven beakers labelled [1], [2], [3], [4], [5] and (X and Y) were used; with 1, 2, 3, 4, 5 containing 100 ml of the acidic extract solution while X and Y were used as the blank (control) for the experiment. The beakers labelled 1–5 contains different volumes of stock solution of the inhibitor with concentrations of 10 mg/L, 20 mg/L, 40 mg/L, 60 mg/L, 80 mg/L which was made up to 100 ml each into different concentration of the acid 1.0 M HCl.Already weighed aluminium alloy coupons were then placed in the test solution.…”

Effects of Cetyltrimethylammonium bromide on the Corrosion Inhibition of a Lead-free α-Brass by Sodium Gluconate in Sulfuric Acid

“…Owing to the importance of brass, its corrosion properties have attracted increasing attention from researchers, thus investigation in this regard is an absolute necessity and warranted [7,8]. Corrosion inhibitors, which can provide effective protection from corrosion, is one of the scientifically substantiated and economically expedient methods to overcome this unwanted problem [9][10][11][12][13]. Indeed, the vast majority of organic compounds used as corrosion inhibitors are exceptionally electron-rich compounds, which can interact readily with metal surface in an electrolyte [14].…”

Anti-corrosion activities of apen-class inhibitive drug on aluminium alloy in simulated chloride environment

“…The inorganic compounds like chromate (Zn, K, Na) and dichromate in their respective class are also be used and tested as good inhibitor. The detrimental effect of this compound in service has been a challenge to health and environmental consequence [8].…”

“…The research in to the progress in eco-friendly inhibitors are found across special trend toward pharmaceutical investigation with the discovery of molecules with related to biological activities [8,9]. It was found that the substructure of drugs and corrosion inhibitors share so many similarities especially with heterocyclic and cyclic system [9,10].…”