The Novel Solution for Negative Impact of Out-of-band and Outgassing by Top Coat Materials(OBPL) in EUVL

Abstract

EUV lithography (EUVL) is the most promising candidate of next generation technology for hp20nm node device manufacturing and beyond. However, the power of light source, masks and photo resists are the most critical issues for driving the EUVL. Especially, concerning about deterioration of the patterning performance by Out-of-Band (OoB) light existing in the EUV light, and contamination problem of exposure tool due to the resist outgassing are the key issues which have to be resolved in the material view point toward the high volume manufacturing by EUVL. This paper proposes the solution for these critical issues by applying the top coat material. The key characteristics for top coat, name as OBPL(Outgassing and Out-of Band Protection Layer) material are the protection of the OoB effect, the prevention of the outgassing from resist as a barrier layer and enhancement of photo resist performance, like resist profile and process window. This paper describes the material design and performance. The optical property needs having the high absorbance of DUV light in OoB range and high transmittance for 13.5nm wavelength. Outgassing barrier property needs high broking property against non contamination chemical species from photo resist outgassing. The study of TOF-SIMS analysis indicates how much the polymer chemistry can impact for outgassing barrier property. Regarding the Lithography performance, using OBPL showed the prevention for OoB irradiation negative effect such as sensitivity variation, LWR and resist profile deterioration. The lithography performance using OBPL showed good process window and resist profile in PTI and NTI process.