The structure and pressure characteristics of graduated compression stockings: experimental and numerical study

Abstract

The incorporation of pressure levels and pressure gradients in the design of compression stockings offers excellent potential to enhance function in the sport science, clinical research and rehabilitation fields. Yet, the connection of processing parameters and structure accompanying the pressure characteristic of current graduated compression stockings (GCS) is not well quantitatively studied. To bridge this knowledge gap, this study aims to analyze the effects of processing parameters, such as elastane yarn count, loop length and elastane feeding tension, on the structure and pressure behavior of GCS in our work. In addition, to investigate the mechanism of the pressure characteristic, two numerical models, the cylinder model and the conical model, are employed to predict the pressure value and the pressure gradient of stockings. The experimental results of the statistical analysis indicate that the loop length is a key factor to control the wale density, length of stockings and final pressure values. Moreover, the elastane feeding tension could affect the course density, girth of stockings and pressure gradient. On the other hand, the numerical results reveal that the conical model is suited for predicting the pressure values because of the change in radius of the limb in the model. The entire experimental and numerical work provide the mechanism for the study basis of processing, structure and pressure characteristics of GCS.

The Influence of Electro-Conductive Compression Knits Wearing Conditions on Heating Characteristics

“…There is a strong correlation between the mechanical characteristics of the fabric and its generated pressure. It is well recognized that mechanical properties of a knitted fabric are related to the geometry of the knitted elements, knitted pattern, properties of the yarns used for knitting, and direction in which elastomeric yarns are laid in the fabric structure as well as the direction in which the fabric is used [14,15]. To generate compression and to achieve better performance of compression support, extra inlay-yarns are inserted into the construction of a knit as inlaid, floated, or plated yarns.…”

Development of Cotton-Based Compression Stockings for Class II Compression Requirements

“…Constructions of fabric generally are related to the pressure characteristic (Zhang et al 2019). The classification of compression stocking is determined by some properties.…”

Correlation of yarn feeding to the dimensional and elastic parameters of tubular knitted fabric

“…Zhang et al. 12 analyzed the effects of loop length and elastane feeding tension on the structure and pressure behavior of graduated compression stockings (GCS) by using the conical model. Some researchers 13 , 14 created a geometric model in a finite element software environment and compared the fabric tensile results obtained from numerical simulation with the experimental data.…”